Review of Fulton Trailer Safety Chains - Safety Chains - FCHA0050324 Video

The InfiniteRule Lock for Demco eZ-Latch #IR66FR will fit 2" and 2-5/16" couplers. This lock has an internal length of 2-15/16" to fit the pin hole on your coupler. I have linked an image below showing it on a 2-5/16" coupler in…

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

It is possible the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will fit the same mount used by your Shelby 5776 jack but we do not have the exact dimensions of the mount used by your Shelby jack so you will need to take a quick…

The Top Wind Trailer Jack Handle part #JP02-010 will be a direct replacement for your Shelby 5793 A-Frame Trailer Jack.

Shelby is no longer in business and would not be the same as Fulton; there are no ratchet repair kits available for Shelby so you'll need to replace your winch. Keeping in mind that a boat trailer winch has a boat-size-to-winch capacity that is…

The 18.8k capacity for the #FCHA0050324 that you referenced is listed as the GTW or gross trailer weight. This chain can be used on a trailer that weighs up to 18,800 lbs. The working load limit is a different capacity that would be more relevant for…

For a general-purpose safety chain for a standard gooseneck trailer we offer #337BSC3842 from Buyers Products. This is a 42-inch chain with 3/8-inch clevis. The chain is rated for 15,000 pounds. This is sold as a single chain, not a pair. The 36-inch…

I attached a set of very detailed instructions for the Andersen safety chain kit part #RM3230 that you referenced. Basically you will have to remove the block that attaches to the king pin of your trailer so that you can remove the two coupler bolts…

The Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230 that you referenced comes with safety chain tabs that install into open slots on your fifth wheel rails like you can see in the attached picture.

From what I was able to find there are several fuses associated with the tow package wiring on a 2006 Chevy Silverado. In the instrument panel on the side of the dash you should see RT TRLR ST/TRN for trailer right turn and brake signal and LT TRLR…

It really depends on your setup, if the safety chain loops on your tow vehicle are spaced far apart then you will need more slack to make a tight turn then if they were closer together. What I would recommend you do is connect your trailer to your…

It doesn't look like we have an exact replacement coupler latch kit available for your trailer coupler. Your best option would be to replace your coupler with something like the #CA5100B which is also a A-frame coupler designed for a 2 inch ball…