Equal-i-zer Weight Distribution EQ90-02-1000 Review Video

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

It is a good thing you caught that before it became a problem. Equal-i-zer makes a well built system so that isn't typical. The Replacement Head for Equal-i-zer #EQ90-02-1000 you're referring to is the correct replacement part and will get…

I'm not sure how to find out the age of your setup, but when I passed your photos along to my contact at Equal-i-zer he said that all you need to do for the upgraded system is swap out your 12K head unit for the 14K #EQ90-02-1400. Since your…

If by OEM, you mean are the Equal-i-zer parts we carry like the Replacement Head for Equal-i-zer Weight Distribution Systems #EQ90-02-1000 manufactured by Equal-i-zer, then the answer is yes. If you see a part with the Equal-i-zer logo under the item…

I confirmed with Progressive Dynamics that the replacement part you need is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V.

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

I reached out to my contact at Equal-i-zer (and Fastway) and he said you can continue using the existing Fastway e2 lift brackets on your trailer with the new Equal-i-zer 1,200 pound Spring Bars #EQ90-01-1299 and Head #EQ90-02-1200. This is not an…

If you are hearing a clicking noise when trying to extend or retract your hydraulic jacks, check to ensure your battery is fully charged because without the proper voltage the jack may just be unable to raise or lower, which is likely going to be the…

Yes, the Equalizer Head part #EQ90-02-1000 that you referenced is the correct replacement head for the 1,000 lb tongue weight system part #EQ37100ET that you have.

The issue is definitely that you have an underrated system, which is why you are experiencing sway. The Equal-i-zer Weight Distribution System #EQ37060ET you said you have now is rated for total tongue weights - the tongue weight of your fully loaded…

Weight distribution with the cargo moved forward in your trailer is going to be your best overall solution for ride quality, sag reduction, and improved handling/braking when towing. The Andersen WD system you have doesn't really do much when the…

The Replacement Socket for Equal-i-zer 1,000 Lb Weight Distribution Systems part #EQ90-03-1000 is larger than the Replacement Socket for Equal-i-zer 600 Lb Weight Distribution Systems part #EQ90-03-0600 therefore, it cannot be used with the…