Determining if B&W Mounting Plate # BWPMHD14005 Will Fit in Rise Position on Jeep Wrangler Unlimited
Question:
I have a 2018 Jeep Wrangler Unlimited Rubicon. Do you know if part # BWPMHD14005 can be used in the rise position with the spare tire on the tailgate? They are stock Rubicon tires. The bumper and hitch are also stock, and the hitch sits just below the bumper. The shank appears long enough to clear the tire per my measurements, but Im worried that this plate will not fit due to the metal rise portion connecting the plate to the shank hitting the tire. I am not able to factor in the plate angle as I am unsure what it is. Any help you can provide is appreciated. Thank you!
asked by: John L
Expert Reply:
While I'm not able to verify if the B&W Pintle Hook Mounting Plate # BWPMHD14005 can fit without bumper or spare tire interference in the rise position on your 2018 Jeep Wrangler Unlimited (we just haven't had a chance to test this), I did go out to our warehouse to take a couple measurements that should help you determine this.
From the center of the hitch pin hole to where this angled piece starts there is a distance of right at 6-1/2". Halfway up the angled metal this distance grows to 9" and from the hitch pin hole to the back of the adjustment plate there is a distance of 12". I have attached an image to assist.
I recommend measuring the distance from the center of the hitch pin hole on your Jeep's hitch to the outermost point of the bumper and also the spare tire. You should hopefully be able to compare your measurements to the dimensions on the Pintle Hook Mounting Plate to determine if bumper or tire interference will come into play.
Please just let me know if an additional measurement might help in this and I will be happy to take it.
Product Page this Question was Asked From
B&W Pintle Hook Mounting Plate for 2" Hitches - 15" Shank - 14 Hole - 16,000 lbs
- Pintle Hitch
- Pintle Mounting Plate
- 16000 lbs GTW
- 2 Inch Hitch Mount
- 14 Holes
- Standard Shank
- B and W
more information >
Continue Researching
- Shop: B&W Pintle Hook Mounting Plate for 2" Hitches - 15" Shank - 14 Hole - 16,000 lbs
- Shop: PullRite OEX Super 5th-Wheel Hitch for Ram Prep Package - Auto Lock Jaw - 25,000 lbs
- Shop: BulletProof Hitches Weight Distribution System w/ Sway Control - No Shank - 10K GTW, 1K TW
- Video: B and W Underbed Gooseneck Trailer Hitch Ball and Safety Chain Kit Install - 2022 Ram 2500
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: BulletProof Hitches 2-Ball Mount for 2" Hitch - 17-1/4" Drop, 17-1/2" Rise - 22K
- Shop: B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch
- Shop: Pintle Lock for BulletProof Hitches Adjustable Ball Mount - 2-5/16" Ball
- Shop: Suspension Enhancement
- Video: Review of BulletProof Hitches Trailer Hitch Ball Mount - Adjustable Ball Mount - HD2016
- Video: BulletProof Hitches Adjustable Ball Mount Pintle Lock Review
- Video: B and W Underbed Gooseneck Trailer Hitch Ball and Safety Chain Kit Install - 2021 Ram 3500
- Video: B and W Pintle Hitch - Pintle Mounting Plate - BWPMHD14005 Review
- Video: Review of BulletProof Hitches Ball Mounts - Hitch - PINTLEATTACHMENT
- Q&A: Recommended Pintle Hook And Mount With 8 - 10 Inch Rise
- Search Results: long pintle
- Search Results: 8 inch rise hitch
- Video: Review of Blue Ox Hitch Adapters - Adjustable High-Low Adapter - BLU28XR
- Shop: Trailer Wiring
- Q&A: Can B&W Pintle Hook Mounting Plate be Used in Rise Position
- Search Results: pintle mounting plate
- Search Results: 4 flat to 7 round
- Shop: Trailer Hitch
- Q&A: Can the B&W Pintle Hook Mounting Plate # BWPMHD14004 be Used in Rise Position
- Search Results: break away cable
- Shop: Brake Controller
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Will Curt Pintle Hook C48215 Fit The B&W Pintle Hook Mounting Plate BMPMHD14005?
- Q&A: Tailgate Clearance with Tow Ready # 63058 Pintle Mount
- Search Results: mounting hardware