Camco RV Exterior - Trim - CAM25212 Review Video

Hey Mike, thanks for the pictures! Based on that what you need is the Premium RV Vinyl Insert Trim Molding #37210015 that you referenced.

The Bauer Products RV Baggage Door Slam Latch, #BA57FR is designed to replace the Bauer Products RV Baggage Door Slam Latch BP-20. It will also replace the Fastec (FIC) 30205. Global Link BLL-40101-2006 and BLL-50101-2006. If your latch that needs…

Yes, Brophy has recommended the #HSSF for trucks with aluminum beds like yours so this would be a great option. For a hardware kit you would need the #TDHP.

Yes, I checked with Torklift and for your 2017 Ford F-350 diesel with an 8 foot bed, factory hitch, and full length running boards the correct tie downs are the #TLF2021 and #TLF3008 that you referenced!

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

I was able to reach out to my tech contact over at TorkLift to get some guidance on the installation of the TorkLift Front Tie-Down #TLF2022 for you. He mentioned that you'll want to apply pressure to the tie-down (pull it down a little bit)…

Brophy Camper Tie-Downs #HSWB do not have a weight rating since they do not support the camper's weight. The truck bed and frame handle that actual camper load and the tie downs provide stability to prevent the camper from shifting in the…

Yes, the Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding #SR86ZR only comes in black, however this is 15' and it is offered in a longer 30' length should you be interested: -Rubber Trim for RVs, Boats, and Utility Vehicle Trim…

It sounds like you may have a ground problem on your Husky. The jack is grounded through the mounting hardware so you want to make sure the mounting hardware is making good contact with clean, corrosion-free surface on the trailer. The jack has one…

When replacing your vinyl molding trim you should measure the overall width of the trim. Since yours is 7/8" I recommend going with the 1" trim, and here are the available options in either White or Black: - 25 Feet: White #37210025 or…

I checked with Thule and for the Thule T2 Classic you have the rear wheel holder part #7521568001 that you referenced is the correct replacement. We have it listed as a fat tire holder but in reality it's the same one the bike rack came with and…

The mounting holes for the Bauer Products Locking Cam Latch #BA32FR are spread 2-13/16" horizontally for the top 2 holes and 3-3/4" from the center line of the top holes to the center of the bottom hole(see image). The mounting holes for…