Review of CURT Hitch - Hitch Ball Box End Wrench - C20001 Video

For a totally hidden trailer hitch that fits your 2019 Honda Odyssey we have the Draw Tite part #DT76GR which has a removable lower section you can take off when not in use which would make it totally out of sight at that point. For trailer wiring…

So what you need is the correct ball mount rise/drop that will allow your trailer to be towed level. If you did need a ball mount with a 6 inch rise we have the #C45090 though. For hitch balls you would want part #63845 for a 2 inch ball or #63847…

Yes, the Draw-Tite Ball Mount part #DT49MR comes with a pre-torqued 2" hitch ball as well as a 5/8" diameter hitch pin and clip. It comes ready to go and use.

I have the perfect solution for your 2022 Honda Odyssey! The Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT76GR has a crosstube that installs up and out of the way and then you can remove the locked receiver when you aren't using the hitch.…

There are a couple options for extended ball mounts that fit 2 inch hitches and have extra length for clearance. You didn't mention the rise or drop you need so I'll give you a couple choices so you can find the right one: - 1" Rise,…

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

Curt hitch ball #40038 has a 1 inch diameter shank. For Curt balls with 3/4 or 1 inch diameter shanks you would use wrench #C20001. The nut on that ball should use the 1-1/2 inch end of the wrench. You could also use a large crescent wrench if you…

The Curt Waterproof Cargo Bag #C18211 offers 15-cubic-feet of internal volume capacity and measures approximately 56 long x 22 wide x 21 tall. A nice feature of a soft vinyl cargo bag like this is that its shape is to a degree dependent on the items…

For a 2 inch hitch ball that will work perfectly with the Curt Ball Mount #C45070 you mentioned I recommend the Tow Ready #63845. When installing the ball it should be torqued down to 250 foot pounds. I have attached a couple short video reviews on…

You will need a 1-1/2" wrench like part #C20001 in order to install the nut on the 2" Hitch Ball part #63845. A 1-7/8" wrench would be much too large.

The Curt Class III Trailer Hitch Receiver #13138 is certainly the hitch I recommend for your 2004 Ford Ranger so that the spare tire can remain stored under the vehicle. To choose the correct ball mount for your truck and trailer, it is best to…

We do have some anti-rattle locking pins that will fit the Convert-A-Ball Cushioned Ball Mount #AMSC4, but the Lets Go Aero Anti-Rattle Device and Lock #63232 is not compatible as it needs a hollow shank to fit properly. You can purchase separate…