Review of BulletProof Hitches Trailer Hitch Ball Mount - Adjustable Ball Mount - HD3014 Video

Yes, you can physically install both the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00 and Lippert Components Standard Axle Lift Kit part #LC425750 but the taller the trailer is, the higher your center of gravity will be which…

If your trailer has an adjustable coupler and you have already tried adjusting it to the proper height for towing level, then you could install a cost effective over-under conversion kit on your trailer. Keep in mind that changing your trailer…

For over under kits like the Dexter #K71-385-00 they will raise the suspension the diameter of the axle added to the thickness of the leaf springs. This kit is for 3 inch round axles so you would add 3 inches to the thickness of the leaf springs and…

The weight distribution shank we offer with the most amount of drop is the Equalizer Weight-Dist Shank part #EQ44FR which offers up to 12" of drop. I have attached a full list of options below if you feel this is too much. That said, measuring…

We can absolutely help you out here, and it makes sense that you'd be getting more sway than you want with an 8,000 lb Fastway system since it isn't rated quite high enough for the 840 lb tongue weight of your loaded 2021 Forest River Vibe.…

That's a pretty low trailer you have. To compute the correct amount of drop you would need you need to measure from the top of the hitch opening to the ground and from the bottom of the coupler to the ground. Based on the dimensions you just gave…

We have drop shanks that can provide 12 inches of drop with a weight distribution system like the Curt shank part #C17125 which can do up to 15-3/4 inches of drop with a trunnion bar system or 16-1/4 inches with a round bar system. The best way to…

For that much drop from a Curt weight distribution shank you'd need the #C17125 which has a 15,000 lb trailer towing capacity.

The weight distribution shank we offer that has the largest amount of drop is part #C17125. This 20-7/8" tall shank has a 16-1/4" drop when used with round-bar systems and a 15-3/4" drop when used with trunnion-bar models. It fits…

It sounds like you're needing a weight distribution shank. You're needing something with a 14-3/4 inch drop. I can get that with the 16-1/4 inch drop when used with a round bar weight distribution system that's provided by the Curt…

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…