Base Plates Specs:
Base Plate Features:
Installation Notes:
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
Product fits vehicles without winches or guards
Special tools required, see instructions.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
Product fits vehicles without winches or guards
Special tools required, see instructions.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Trimming of front air dam and/or fascia may be required for installation
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Bumper fascia must be removed and replaced during installation
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product fits bumper mounts with a 7/8 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product will also fit bumpers with a 1 inch thick mount that need extended reach, such as the Smittybilt Gen2 bumpers.
More Information >Base Plates Specs:
Base Plate Features:
Tech Tip:
Product fits bumper mounts with a 1 inch pin diameter, and includes spacers to fit mounts from 5/8 inch to 7/8 inch thick.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Trimming of front air dam and/or fascia may be required for installation
More Information >Base Plates Specs:
Base Plate Features:
Base Plates Specs:
Base Plate Features:
Installation Notes:
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
Product fits vehicles without winches or guards
Special tools required, see instructions.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
Product fits vehicles without winches or guards
Special tools required, see instructions.
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Installation requires some minor drilling
Requires temporary removal of bumper/fascia during installation
Trimming or removal of underbody panel required for installation
More Information >Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper, fascia, and/or grille during installation
Drilling required for installation
Tech Tip:
Product fits vehicles that are equipped with Warn winch VR EVO 10-S, part number 103253. May also be installed without the Warn winch by purchasing a Mopar winch mounting kit from a Jeep dealer.
More Information >Base Plates Specs:
Base Plate Features:
Base Plates Specs:
Base Plate Features:
Installation Notes:
Requires temporary removal of bumper, fascia, and/or grille during installation
Drilling required for installation
Tech Tip:
Product fits vehicles that are equipped with Warn winch VR EVO 10-S, part number 103253. May also be installed without the Warn winch by purchasing a Mopar winch mounting kit from a Jeep dealer.
More Information >Videos
for Base Plates
Help Articles
for Base Plates
Expert Answers
for Base Plates
I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…
view full answer...Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the…
view full answer...When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
view full answer...The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly…
view full answer...I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...Filter Products (32)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD