Anti-Sway Bars Specs:
Features:
This gas spring steering stabilizer will give your motorhome a responsive steering experience that keeps your rig from wandering. Custom mounting brackets included.
Installation Notes:
No drilling required for installation
Designed for vehicles with a GVWR of 22,000 lbs or greater
Tech Tip:
To ensure you receive the correct part, you must measure the front axle spring U-bolts. Use this part if they are 3/4 inches in diameter. If they are 7/8 inches, you will need to use part RM56GR.
More Information >Anti-Sway Bars Specs:
Features:
The sturdy steel spring on this stabilizer keeps your vehicle in line by constantly working to maintain its position. Mount it between the steering mechanism and the chassis for a tight connection that will minimize wander and correct oversteering.
Installation Notes:
No drilling required for installation
Tech Tip:
To ensure you receive the correct part, you must measure the front axle spring U-bolts. Use this part if they are 3/4 inches in diameter. If they are 7/8 inches, you will need to use part RM89GR.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the rear axle and to the frame to balance weight transfer and reduce body roll.
Installation Notes:
Drilling required for installation
Rear facing swaybar.
Tech Tip:
Product fits models with a 6x4 u-bolt pattern only. Product does not fit vehicles with a center fuel tank.
More Information >Anti-Sway Bars Specs:
Features:
Make your vehicle easier to steer and control with the TruTrac system. This unique rod keeps your vehicle's axle in line so that your wheels won't veer into ruts. 4140 Chromoly steel and polyurethane bushings are strong and long-lasting.
Installation Notes:
No drilling required for installation
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the rear axle and to the frame to balance weight transfer and reduce body roll.
Installation Notes:
Drilling required for installation
Not for Class A motorhomes.
Tech Tip:
Product is designed for vehicles with automatic chains mounted behind the rear axle. Fits models with a 5x4 u-bolt pattern.
More Information >Anti-Sway Bars Specs:
Features:
No more white-knuckled driving on your adventures. This gas spring steering stabilizer will help keep your rig from wandering while also giving you responsive steering. Includes custom mounting brackets.
Installation Notes:
No drilling required for installation
Designed for vehicles with a GVWR under 22,000 lbs
Tech Tip:
To ensure you receive the correct part, you must measure the front axle spring U-bolts. Use this part if they are 3/4 inches in diameter. If they are 7/8 inches, you will need to use part RM29GR.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the front axle and to the frame to balance weight transfer and reduce body roll.
Installation Notes:
No drilling required for installation
Does not fit chassis with Mercedes Benz engines that have auxiliary cooling package
Tech Tip:
Product fits vehicles with an 8000 lb front axle.
More Information >Anti-Sway Bars Specs:
Features:
This gas spring steering stabilizer will give your motorhome a responsive steering experience that keeps your rig from wandering. Custom mounting brackets included.
Installation Notes:
No drilling required for installation
Tech Tip:
To ensure you receive the correct part, you must measure the front axle spring U-bolts. Use this part if they are 7/8 inches in diameter. If they are 3/4 inches, you will need to use part RM25RR.
More Information >Anti-Sway Bars Specs:
Features:
No more white-knuckled driving on your adventures. This gas spring steering stabilizer will help keep your rig from wandering while also giving you responsive steering. Includes custom mounting brackets.
Installation Notes:
No drilling required for installation
Tech Tip:
To ensure you receive the correct part, you must measure the front axle spring U-bolts. Use this part if they are 7/8 inches in diameter. If they are 3/4 inches, you will need to use part RM68RR.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the rear axle and to the frame to balance weight transfer and reduce body roll.
Installation Notes:
Drilling required for installation
Rear facing swaybar.
Tech Tip:
Vehicle must have rear-mount On-Spot automatic chains already installed. Fits models with a 5x4 u-bolt pattern.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the rear axle and to the frame to balance weight transfer and reduce body roll.
Installation Notes:
Drilling required for installation
Front facing swaybar.
Does not fit with auto chains
Tech Tip:
Product fits models with a 5x4 u-bolt pattern.
More Information >Videos
for Anti-Sway Bars
Help Articles
for Anti-Sway Bars
Expert Answers
for Anti-Sway Bars
The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to…
view full answer...When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
view full answer...The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…
view full answer...The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…
view full answer...On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...According to my research, your 92865A-1 hub/drum has a 25580 inner and an 14125A outer bearing and a 8 on 6-1/2 inch lug pattern, as does the AxleTek #AKHD-865-7-2-K hub drum you referenced. The #AKHD-865-7-2-K would be an acceptable replacement for…
view full answer...Filter Products (22)