2000 GMC C/K Series Pickup Suspension Enhancement

Features:

10,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.

Installation Notes:

No drilling required for installation

This is a Severe Service kit and should only be used on vehicles with a slide-in camper, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.

Compatible with in-bed hitch

Product can be used for vehicles with or without factory top overload springs

Tech Tip:

For vehicles with front Cast Lower Control Arms

Features:

10,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.

Installation Notes:

No drilling required for installation

This is a Severe Service kit and should only be used on vehicles with a slide-in camper, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.

Compatible with in-bed hitch

Product can be used for vehicles with or without factory top overload springs

Features:

10,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.

Installation Notes:

No drilling required for installation

This is a Severe Service kit and should only be used on vehicles with a slide-in camper, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.

Compatible with in-bed hitch

Product can be used for vehicles with or without factory top overload springs

Features:

3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Does not fit vehicles with factory top overload springs

Features:

3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Does not fit vehicles with factory top overload springs

Features:

3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Does not fit vehicles with factory top overload springs

Does not fit models with dual rear wheels

Features:

3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Does not fit vehicles with factory top overload springs

Does not fit models with dual rear wheels

Features:

Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.

Installation Notes:

No drilling required for installation

Product designed for vehicles with factory leaf springs and a lower overload spring

Features:

Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.

Installation Notes:

No drilling required for installation

Product designed for vehicles with factory leaf springs and a lower overload spring

Features:

Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.

Installation Notes:

No drilling required for installation

Product designed for vehicles with factory leaf springs and a lower overload spring

Features:

Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.

Installation Notes:

No drilling required for installation

Product designed for vehicles with factory leaf springs and a lower overload spring

Features:

3,000-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.

Installation Notes:

No drilling required for installation

Product does not fit vehicles with factory top overload springs

Tech Tip:

Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.

Features:

3,000-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.

Installation Notes:

No drilling required for installation

Product does not fit vehicles with factory top overload springs

Tech Tip:

Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.

Features:

3,000-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.

Installation Notes:

No drilling required for installation

Product does not fit vehicles with factory top overload springs

Application includes models with dual rear wheels

Tech Tip:

Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.

Features:

3,000-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.

Installation Notes:

No drilling required for installation

Product does not fit vehicles with factory top overload springs

Application includes models with dual rear wheels

Tech Tip:

Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.

Features:

2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Tech Tip:

For vehicles that have an overload spring above the leaf spring pack, or that carry extra heavy loads, see part number RAS3611-HD.

Features:

2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Tech Tip:

For vehicles that have an overload spring above the leaf spring pack, or that carry extra heavy loads, see part number RAS3611-HD.

Features:

2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Does not fit models with dual rear wheels

Tech Tip:

For vehicles that have an overload spring above the leaf spring pack, or that carry extra heavy loads, see part number RAS3611-HD.

Features:

2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Does not fit models with dual rear wheels

Tech Tip:

For vehicles that have an overload spring above the leaf spring pack, or that carry extra heavy loads, see part number RAS3611-HD.

Features:

2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

Features:

2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

Features:

2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

Features:

2,500-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

Features:

3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Product is intended for vehicles with factory top overload springs

Features:

3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Product is intended for vehicles with factory top overload springs

Features:

3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Product is intended for vehicles with factory top overload springs

Application includes models with dual rear wheels

Features:

3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.

Installation Notes:

No drilling required for installation

Product is intended for vehicles with factory top overload springs

Application includes models with dual rear wheels

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Silent Ride urethane bushings prevent rattling.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Silent Ride urethane bushings prevent rattling.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Features:

5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.

Installation Notes:

Drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Product can be used for vehicles with or without factory top overload springs

For trucks with Rear Drum Brakes

Features:

5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.

Installation Notes:

Drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Product can be used for vehicles with or without factory top overload springs

For trucks with Rear Drum Brakes

Features:

5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.

Installation Notes:

Drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Product can be used for vehicles with or without factory top overload springs

Features:

5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.

Installation Notes:

Drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Product can be used for vehicles with or without factory top overload springs

Features:

14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

For vehicles with front Cast Lower Control Arms

Features:

14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

For vehicles with front Cast Lower Control Arms

Features:

14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

For vehicles with front Cast Lower Control Arms

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

Drilling required for installation

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

Drilling required for installation

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

Drilling required for installation

Compatible with in-bed hitch

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

Drilling required for installation

Compatible with in-bed hitch

Features:

3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Product is only for vehicles with a bottom leaf spring that is less than 35 inches long.

Features:

3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Product is only for vehicles with a bottom leaf spring that is less than 35 inches long.

Features:

1,650-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.

Installation Notes:

No drilling required for installation

Product does not fit vehicles with factory top overload springs

Tech Tip:

Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.

Features:

1,650-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.

Installation Notes:

No drilling required for installation

Product does not fit vehicles with factory top overload springs

Application includes models with dual rear wheels

Tech Tip:

Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.

Features:

1,650-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.

Installation Notes:

No drilling required for installation

Product does not fit vehicles with factory top overload springs

Tech Tip:

Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.

Features:

1,650-lb Capacity. Upgrade your vehicle's rear leaf spring suspension with these helper springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for factory springs that sit above the axle.

Installation Notes:

No drilling required for installation

Product does not fit vehicles with factory top overload springs

Application includes models with dual rear wheels

Tech Tip:

Special order u-bolts (5-1/4") required if vehicle spring stack height is greater than 2-3/4" at axle.

Features:

2,000-lb Capacity. Lowered trucks have a weakened load capacity and reduced suspension travel. SlamAir adjustable air springs beef up your suspension, improving ride comfort, preventing bottoming out, and increasing overall safety.

Installation Notes:

Designed for vehicles that have been lowered 5" to 6"

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Tech Tip:

This kit is designed to bolt on to the notched section of a Bell Tech frame behind the axle.

Features:

2,000-lb Capacity. Lowered trucks have a weakened load capacity and reduced suspension travel. SlamAir adjustable air springs beef up your suspension, improving ride comfort, preventing bottoming out, and increasing overall safety.

Installation Notes:

Designed for vehicles that have been lowered 5" to 6"

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Tech Tip:

This kit is designed to bolt on to the notched section of a Bell Tech frame behind the axle.

Features:

3,700-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Maintains stock ride height.

Installation Notes:

No drilling required for installation

Product does not add any lift to suspension; it will remain at the stock height

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

For vehicles with front Cast Lower Control Arms

Compatible with in-bed hitch

Product can be used for vehicles with or without factory top overload springs

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Product can be used for vehicles with or without factory top overload springs

Features:

10,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Fits Heavy Duty models only

Product can be used for vehicles with or without factory top overload springs

Features:

5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.

Installation Notes:

Drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Tech Tip:

Distance from the axle to the frame must be greater than 7.25"

Features:

5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.

Installation Notes:

Drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Tech Tip:

Distance from the axle to the frame must be greater than 7.25"

Features:

5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.

Installation Notes:

Drilling required for installation

Designed for vehicles with a GVWR less than 11,000 lbs

Does not fit vehicles with a 4" rear axle housing

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Tech Tip:

Distance from the axle to the frame must be greater than 7.25"

Features:

5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.

Installation Notes:

Drilling required for installation

Designed for vehicles with a GVWR less than 11,000 lbs

Does not fit vehicles with a 4" rear axle housing

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Tech Tip:

Distance from the axle to the frame must be greater than 7.25"

Features:

7,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Fits Heavy Duty models only

Designed for vehicles with front leaf springs

Features:

3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Does not fit models with dual rear wheels.

Features:

3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Does not fit models with dual rear wheels.

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

For vehicles with front Cast Lower Control Arms

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

For vehicles with front Cast Lower Control Arms

Features:

14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

Features:

14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Features:

14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

For vehicles with front Cast Lower Control Arms

Features:

6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

For vehicles with front Cast Lower Control Arms

Product can be used for vehicles with or without factory top overload springs

Features:

5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.

Installation Notes:

Drilling required for installation

Tech Tip:

Distance from the axle to the frame must be greater than 7.25"

Features:

5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.

Installation Notes:

Drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Designed for vehicles with a GVWR less than 11,000 lbs

Does not fit vehicles with a 4" rear axle housing

Tech Tip:

Distance from the axle to the frame must be greater than 7.25"

Features:

5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.

Installation Notes:

Drilling required for installation

Tech Tip:

Distance from the axle to the frame must be greater than 7.25"

Features:

5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.

Installation Notes:

Drilling required for installation

Not compatible with in-bed hitch; product mounts in same location as hitch brackets

Designed for vehicles with a GVWR less than 11,000 lbs

Does not fit vehicles with a 4" rear axle housing

Tech Tip:

Distance from the axle to the frame must be greater than 7.25"

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Product is only for vehicles with a bottom leaf spring that is less than 35 inches long.

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Product is only for vehicles with a bottom leaf spring that is less than 35 inches long.

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Product is only for vehicles with a bottom leaf spring that is longer than 35 inches.

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Product is only for vehicles with a bottom leaf spring that is longer than 35 inches.

Features:

3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Designed for models with dual rear wheels only.

Features:

3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Designed for models with dual rear wheels only.

Features:

3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Product is only for vehicles with a bottom leaf spring that is longer than 35 inches.

Features:

3,500-lb Capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. These heavy-duty springs are engineered for constant use. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Product is only for vehicles with a bottom leaf spring that is longer than 35 inches.

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Does not fit models with dual rear wheels.

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Does not fit models with dual rear wheels.

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Designed for models with dual rear wheels only.

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Compatible with in-bed hitch

Product is designed for vehicles with approximately 2-1/2 inch wide springs

Tech Tip:

Designed for models with dual rear wheels only.

Features:

7,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.

Installation Notes:

No drilling required for installation

This is a Severe Service kit and should only be used on vehicles with a slide-in camper, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.

Product can be used for vehicles with or without factory top overload springs

Tech Tip:

For vehicles with front Cast Lower Control Arms

Features:

7,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.

Installation Notes:

No drilling required for installation

This is a Severe Service kit and should only be used on vehicles with a slide-in camper, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.

Product can be used for vehicles with or without factory top overload springs

Tech Tip:

For vehicles with front Cast Lower Control Arms