Dimensions of Bully Black Bull LED Hitch-Mounted Step

Question

Question:

I just wanted to get a measurement from the last pin hole, closest to the step, to the step itself and from that hole to the end of the step where the led is. I actually might want to use this as a add-on piece more than a step, and my hitch is tucked under my rear bumper more than most. I figured I could probably tuck most of this step under my bumper and use it as an extra light and rear piece for looks and maybe added protection. Id just like to see how much it will tuck under the bumper if I used the last hole, sliding it all the way in the hitch. Thanks!

asked by: D. G

1

Helpful Expert Reply:

I went out to the warehouse and pulled the Bully Black Bull LED Hitch-Mounted Step, part # BBS-1104L, and took some measurements for you. Take a look at the image of the dimensions and the video I made for you at right.

From the last pin hole closest to the step, to the step itself the measurement is 3-1/8 inches. The measurement from the last pin hole to the end of the step where the LED is measures 6-1/2 inches.

Check out the video review of this Hitch Mounted Step I have included at right.

expert reply by: Chris O

1

click to enlarge

Answer 1

We actually do have a trailer wiring harness that is a fit for your 2021 Toyota Venza, but since it was redesigned for the 2021 model year, the part number you mentioned won't work. Instead, the exact wiring harness that I verified from the…

view full answer...

Answer 2

I pulled up the online owners manual of your 2022 Toyota Venza and Toyota states that it is not recommended to tow with your vehicle which is why they also do not list a towing capacity. So this begs the very valid question of why do we have hitches…

view full answer...

Answer 3

I spoke with my contact at CURT and he stated that the Step, #C31001, is 6-3/8 inches front to back and 10-3/4 inches wide. I have made a picture showing these dimensions for you.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Dimensions of Bully Black Bull LED Hitch-Mounted Step

Featured Help Information

Miscellaneous Media

Continue Researching