Dimensions of the Replacement Wheel Strap # 853-7002

Question

Question:

Can you tell me the dimensions of this strap... Length and width?

asked by: Chuck

1

Helpful Expert Reply:

I pulled the Replacement Wheel Strap # 853-7002 from our warehouse and found that it is 11-1/2 inches long by 13/16 of an inch thick.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Replacement Fat Tire Rear Wheel Holder and Strap #7521568001 is the same one that comes with the T2 Classic bike racks. There is a way that the strap has to be oriented in the wheel holder to fit wider tires. First you remove the strap from the…

view full answer...

Answer 2

We have a strap that will work for you. The Fat Wheel Strap for the Thule T2 Classic, #8527642001, will allow you to secure your fat tire bike on your rack. This strap measures 18 inches long is confirmed to fit the Thule T2 Classic Platform Bike…

view full answer...

Answer 3

I am not familiar with the Sports Works bike racks, but I recommend measuring your wheel strap to see if the Thule Replacement Wheel Strap #853-7002 has matching dimensions. The Replacement Strap #853-7002 is 11-1/2 inches long by 13/16 inch wide. I…

view full answer...

Answer 4

The Replacement Fat Tire Rear Wheel Holder & Strap - Thule T1 or T2 Classic Platform Bike Racks - Qty 1 #7521568001 will work with your Sportworks 2 bike rack. If you're only wanting the strap alone The Replacement Fat Tire Wheel Strap for…

view full answer...

Answer 5

You will need to replace the whole rear wheel cradle since the ratchet part is fixed to the wheel cradle. The original rear wheel cradle was replaced with a version that will now also accommodate fat tire bikes (but it still fits the T2 bike rack).…

view full answer...

Answer 6

I checked with Thule and the only way to replace the strap of the Thule T2 pro is to replace the entire cradle with the part #7521682001. They do not offer the strap by itself. The strap you mentioned does not fit your bike.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Dimensions of the Replacement Wheel Strap # 853-7002

Product Page this Question was Asked From

Continue Researching