Installing 7-way Trailer Connector in Stock Location on 2014 Honda Pilot

Question

Question:

I am looking online and like all of your videos on how to install the easiest. I have a 2014 Honda Pilot and the Honda wiring harness part number is 08L91-SZA-100A and is plug and play. When Im reading the reviews online of your 7 way round harness people keep commenting that it doesnt fit in the cutout on the Pilot bumper and they have to cut another hole. Is that accurate? I want it to fit in the Honda cutout and mount to the included metal bracket and not just in the plastic bumper. Thanks!!!

asked by: Barry J

0

Expert Reply:

Installing the # 118265 7-way connector would involve using a hole saw to make a hole to mount the trailer connector, if you wish the installation to look like a stock install. I can understand why you'd be reluctant to cut a hole in the bumper of a brand new vehicle. We've had several reviews from folks that simply used a 2 inch hole saw to cut through the bumper, and from what I've read, it didn't sound like a difficult process. I guess you'll need to decide if the extra cost of the Honda part is worth not needing to drill a hole.

expert reply by: Mike L

0

Answer 1

The part number you referenced, TRAB5343, is basically the older style Thule Aero crossbar roof rack. We do not carry that specific roof rack, but we do carry the newer version of the Thule Aero bar that would work great for you. For that you would…

view full answer...

Answer 2

I have a solution for you. The reason why the bottom slots of the 53-inch WingBar evo crossbars #TH711420 will not attach to the Evo Raised Rail Feet for Thule Crossbars #TH710401 is because the 53-inch version of the WingBar Evo Crossbars are too…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

To add a hitch to your 2024 Jeep Grand Cherokee L, I recommend the Draw-Tite item #DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity…

view full answer...

Answer 7

That's ironic because currently (March 2022) Thule doesn't have a fit listed for the 2022 Subaru Forester Wilderness. With that being said, from our research it looks like the Wilderness models on the newer Subaru vehicles won't affect…

view full answer...

Answer 8

Easily the best roof rack for your 2023 Kia Sportage with flush mounted rails is from Thule. It will easily allow you to mount your rooftop tent, is highly durable, quiet, and super easy to both install and use. The parts that make up the Thule rack…

view full answer...

Answer 9

Since your 2023 Subaru Crosstrek does not have raised rails you are going to need a whole new roof rack since the Thule Rapid 450R Feet #753-3399-02 are only going to fit vehicles with raised rails. I recommend sticking with the Thule roof rack…

view full answer...