Replacement Trailer Axles that have 3,500 lb Capacity Recommendation
Question:
Follwo up on prior email...looked at the 3500 ones, I dont believe mine has an bends in the middle, does this mean I have to replace both? Not just one? Thanks
asked by: Earl M
Helpful Expert Reply:
We have a couple options for a 3,500 lb axle that could work on your 1985 Terry Resort Travel Trailer, but they all have the same dimensions that hopefully would match up with what you have.
You will need to measure your axles first though.
The axles we offer are 89 inches from hub face to hub face and 74 inches from spring center to spring center. If your axles match these dimensions the part # T3584F-EZ-8974 would be a great choice for a hubless axle.
If you wanted an axle that came with hub/drums that have a 5 on 4-1/2 inch bolt pattern you would want the # e43SR.
If you need axles with different dimensions you will need to check with your local trailer shop to have them order you in custom axles that would fit.
Products Referenced in This Question
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Dexter Bronze Bushing Review
- Video: Review of Redline Trailer Leaf Spring Suspension - Hangers - Suspension Kits - HAP-105-205-01
- Video: Redline Trailer Suspension SP05-060 Review
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Shop: Lippert AP Kit - Tandem Axle Road Armor Wet Bolts and Shackles
- Shop: Replacement Shackle Strap - 2-5/8" Long
- Shop: 3-Leaf Double-Eye Spring for 3,300-lb Trailer Axles - 18-5/16" Long
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Shop: Nylon Bushings - 9/16" Inner Diameter, 3/4" Outer Diameter - 1-3/4" Long - Qty 6
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Search Results: 25580
- Video: Lippert Solera Slider Slide-Topper Review
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Shop: Brake Controller
- Search Results: dust cap
- Article: Trailer Tire Sizing
- Video: Choosing the Right Brake Controller
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
Earl M.
10/14/2014
Follwo up on prior email...looked at the 3500 ones, I dont believe mine has an bends in the middle, does this mean I have to replace both? Not just one? Thanks