Trailer Hitch Receiver Recommendation for 2011 Infinity EX35

Question

Question:

Hi, looking for a hitch for my 2011 Infinity EX35. Infinity says towing not recommended. Looking to tow a 2500lbs boat? What hitch would you recommend? thanks

asked by: Martin L

0

Expert Reply:

You are correct, Infinity does not recommend trailer towing due to the added stress that it puts on the vehicle. I can not recommend doing anything that would contradict this.

Although the EX35 is not recommended for towing, Curt has designed a trailer hitch for the 2011 Infiniti EX35.

The Trailer Hitch Receiver, # C11510, bolts to the frame of the EX35 with no welding required. This is a Class I hitch receiver and has a maximum towing capacity of 1,500 pounds and a maximum tongue weight capacity of 150 pounds.

This is the only hitch that we have available for the 2011 Infinity EX35.

expert reply by: Leah S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

For your 2014 BMW X5 the two 4-pole wiring kits you referenced, hard-wire kit #C59236 and the ZCI no-splice kit #119250KIT, both will provide the same basic lighting signals for a trailer but they differ a lot in price and in the nature of their…

view full answer...

Answer 6

According to Curt, when installing the Curt Hitch, #C11510 on a 2016 Infiniti QX50, you have to invert the rubber isolators for the exhaust system when reconnecting the exhaust mount to the hitch. If you failed to invert these rubber isolators, then…

view full answer...

Answer 7

After installing the Curt Trailer Hitch Receiver #C98DR onto your 2023 Hyundai Ioniq 5 you will have to trim the panel to be able to reattach it to your car. You will not have to modify the bumper. During the installation process the underbody…

view full answer...

Answer 8

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 9

Yes, this Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C94WR is a compatible hitch receiver and confirmed to fit your 2022 Hyundai Tucson Hybrid Limited.

view full answer...

Answer 10

Thank you for your purchase of the Class I 1-1/4" Curt Trailer Hitch Receiver #C11510 for your 2008 Infiniti EX35! When it comes to the wiring you'll have to use a splice-in option and for that I recommend the Curt #C59236. This kit has the…

view full answer...

Trailer Hitch Receiver Recommendation for 2011 Infinity EX35

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching