Exhaust Pipes Seem to Hang Lower After Curt Hitch Installation on 2016 Infiniti QX 50
Question:
The exhaust pipes are lower than before hitch installed. Any suggestions?
asked by: Bill M
0
Expert Reply:
According to Curt, when installing the Curt Hitch, # C11510 on a 2016 Infiniti QX50, you have to invert the rubber isolators for the exhaust system when reconnecting the exhaust mount to the hitch.
If you failed to invert these rubber isolators, then it is possible that you vehicle's exhaust pipes might very well hang lower than they originally were mounted. Maybe as much as an 1-1/2 inch lower.
I would double check or even invert theses hangers then reinstall the exhaust to see if this fixes the height issue.
expert reply by:
Jared P
0
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 150 lbs TW
- 1500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Best Replacement Option for 8-14.5 Trailer Tires
- Q&A: Recommendation for Solera RV Slide-Out Awning 154" Flange-To-Flange
- Article: Best Boat Accessories
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Choosing Between Hard-Wire and ZCI Zero Contact Wiring Harness Kits for 2014 BMW X5
- Q&A: What Are Differences Between Bias (D) And Radial (R) Tires
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Troubleshooting Titan BrakeRite Electric Over Hydraulic Trailer Brake Actuator-Won't Build Pressure
- Q&A: Do I Have To Modify My Bumper For Curt Hitch Installation On A 2023 Hyundai Ioniq 5
- Q&A: Recommended Trailer Hitch for 2023 Hyundai Tucson - All Models
- Article: Trailer Hitch Receiver Sizes
- Article: How to Charge a Dump Trailer Battery
- Article: How to Use a Roof Rack (Like a Boss)
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch