Camper Tie Down Recommendation for a 2003 Toyota Tundra

Question

Question:

Will the HSSF camper tie down fit a 2003 Toyota Tundra?

asked by: Dustin

0

Expert Reply:

For your 2003 Toyota Tundra you would want the Tie-Downs part # TDSF. We had a customer use these on his 2005 Tundra (same generation as yours) and let us know that they worked very well for him. The # HSSF that you referenced is a universal kit that could work for your truck, but we don't have fit information for this kit so your best option would be the # TDSF since we know it would work for you.

You also will want the Camper Tie Down Hardware Package, # TDHP.

expert reply by: Jameson C

0

Answer 1

Brophy camper tie-downs #HSAB are designed for full-size trucks but could fit your 1995 Toyota T100 if: External bed rail width does not exceed 5-1/2" There is at least 2" of space beneath lip of bed rail Truck does not have a drop-in bed…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 4

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we have the K-Source Universal Towing Mirrors #KS69ZR which will fit your 2024 Toyota Tundra. These towing mirrors are easy to install, has mirror face dimensions of 7-3/4" tall x 5-1/8" wide, and has rubber pads on the straps to avoid…

view full answer...

Answer 7

Hello Kendall. The K-Source Universal Towing Mirrors #KS69ZR are going to be your best bet for the 2022 Toyota Tundra Limited. We have double checked with the manufacturer and confirmed that they will fit the Limited models with full chrome or…

view full answer...

Answer 8

Then I do have some good news for you Rick. The BAKFlip MX4 Hard Tonneau Cover #BAK448130 will not block the camera on your 2024 GMC Sierra 1500 Denali short bed truck. This is the correct cover for your truck not having the CarbonPro bed.

view full answer...

Answer 9

I do see the BAKFlip MX4 Hard Tonneau Cover #BAK52FR you found is for a short CarbonPro bed on your 2024 GMC Sierra 1500 Denali. This will interfere with the 3rd brake light bed camera on your truck. I recommend looking at the Pace Edwards…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 12

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Camper Tie Down Recommendation for a 2003 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching