Availability of Replacement Frame Hooks for Swagman XTC2 Platform Type Bike Rack

Question

Question:

I have a hitch bike rack. I think the model is XTC2. I need a slide frame hook. Is the part I need the same as the one for the sport rider HR1000. If not could you please help me get a replacement for my bike rack.

asked by: Lupe H

0

Expert Reply:

Swagman does indeed offer replacement hooks for their XTC2 bike rack, but they only offer the short arm individually as part # P166. For the long arm, you'd need to purchase the set of two, as part # P186.

expert reply by: Mike L

0

Answer 1

On your Swagman XC bike rack there are two hook sizes. A short one and a long one. The short one is the one that goes on top of the other hook. See picture I attached. The part #P186 that you referenced includes both hooks.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 4

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 5

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Availability of Replacement Frame Hooks for Swagman XTC2 Platform Type Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching