bing tracking image
Q & A Icon

Replacement Bearings for 1989 Pace America 20 x 8-Foot Enclosed Trailer  

Question:

i have 1989 Pace america enclosed 20x8 trailer and i need bearings for it. im not sure of what size i need due to no markings on it or part numbers on the bearings. any help?

1

Helpful Expert Reply:

Replacement trailer bearings (and races and seals) are most easily identified by using the part numbers stamped or molded into the original parts. The linked photo shows the typical placement and appearance of these part numbers on bearings, races and seals. You can use our search box with these part numbers to find replacements.

If you cannot find the part numbers you can instead measure your spindles in the three locations in the photo indicated by the red arrows. These are the points on the spindle where the grease seal (B), the inner bearing (C) and the outer bearing (D) ride. You'll need to use a precision digitial caliper to take these measurements, which must be known to the nearest thousandth of an inch (three decimal places).

Once you have the measurements you can select bearings based on these inner diameter measurements using the link provided. The filters in the left-hand margin will allow you to narrow the results based on your spindle measurements.

expert reply by:
1
Adam R
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>