Will Convert-A-Ball Weight Distribution Shank # AMAC1 Fit a Husky Weight Distribution System
Question:
I need to lower the hitch height while pulling my 2009 Forest River Salem camper. I recently purchased a Ram 2500 4x4. I use to pull with a 2005 Ford F150. I have a Husky weight distribution hitch that is lowered as far as it will go on the shank. I need 2 to 3 more inches...Will this work with the Husky hitch? I am about to pull my camper 1400 miles round trip and want to make sure the camper is level while towing.
asked by: Jimmy B
Expert Reply:
Husky is the one brand that I know of that has at least 2 different shanks with different sizes as far as the hole diameter goes. You have to measure your existing shank to determine if # AMAC1 will fit. The vertical part of the # AMAC1 is 2 inches square. The holes are 1-1/4 inches apart on center. And the holes are 3/4 inches in diameter.
Product Page this Question was Asked From
Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 7 Inch Rise
- Convert-A-Ball
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: RV Interior Lighting
- Search Results: led interior trailer lights
- Search Results: spare tire mount
- Search Results: trailer interior lights
- Video: Optronics Opti-Brite 12V/24V LED RV Dome Light Review and Installation
- Shop: Optronics 12V LED RV Dome Light - Double - 10-5/16" Long x 4-3/16" Wide - White Housing
- Shop: Gustafson 12V LED RV Dome Light - Single - 7-1/4" Long x 5" Wide - White
- Shop: Opti-Brite 12V/24V LED RV Dome Light - Single - Surface or Recessed - 13-1/2" Long - White Trim
- Shop: Opti-Brite 12V/24V LED RV Dome Light - Single - 6-3/4" Long - White Housing
- Shop: Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
- Search Results: weight distribution shank
- Search Results: adjustable ball mount
- Shop: etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin
- Shop: Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - Birch Trim
- Video: Convert-A-Ball Cushioned Weight Distribution Shank Review - 2013 Dodge Ram
- Search Results: receiver cover
- Q&A: Can Convert-A-Ball Cushioned Weight Distribution Shank be Used Without a Weight Distribution System
- Q&A: Will the Convert-A-Ball Cushioned Weight Distribution Shank Work with Equal-i-zer WD System
- Q&A: Is Rise/Drop Figure for Weight Distribution Shank Standard Between all WD System Brand Heads
- Q&A: Weight Capacity of the Convert-A-Ball Adapter Part Number BA-1
- Q&A: Will the Convert-A-Ball Cushioned Weight Distribution Shank Fit a Curt Weight Distribution System
- Q&A: Tool for Adjusting Drum Brakes on Drop Axle
- Search Results: 44649
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Video: Roadmaster Dual Hitch Receiver Adapter Review RM-077-4
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
on Accessories and Parts
