Resetting a Titan Surge Brake Actuator # T4747200

Question

Question:

If the breakaway lever failsafe is tripped accidentally how would it be reset?

asked by: Jason

0

Expert Reply:

To release the breakaway lever of the Titan Zinc-Plated Brake Actuator # T4747200 you will need to use a screw driver to push the clip on the lever back towards the rear of the trailer while pushing the lever back to its original position.

expert reply by: Jameson C

0

Answer 1

Based on my research your M1101 trailer has a GVWR of around 3400lbs, so for a replacement axle I recommend taking a look at the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Off-Road Tires - 3,500 lbs #ASR35HDS01 which will…

view full answer...

Answer 2

The correct replacement breakaway lever for your Titan Model 6 Zinc-Plated Brake Actuator part #T4747200 is the Replacement Breakaway Lever with Pin for Titan Model 6 Actuators part #T4594100. In regards to installation, this will be up to you as…

view full answer...

Answer 3

I will be happy to explain resetting the breakaway lever on the Titan Model 6 actuator, #T4747200. The manual states: Resetting the Break-away Lever: (Refer to the parts diagram in the instructions linked to the right). When the break-away lever…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…

view full answer...

Answer 6

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 7

You will need to cut that off of your 2001 Cobalt 240 to replace the actuator since there are no replacements that will fit. I recommend welding on a straight tongue so you can use a bolt-on actuator like the Dexter Zinc-Plated Brake Actuator…

view full answer...

Answer 8

I attached a picture that shows all of the mounting hole dimensions pointed out as well as a second picture that shows the distance from the front mounting hole to rear of shroud on the Demco DA91 #DM8750311 you referenced.

view full answer...

Answer 9

Hey Mark, Yes, we offer the Dexter 023-341-00 under part #DX69CR and Dexter 023-340-00 under part #DX79CR. These also come in a kit together under part #DX89CR.

view full answer...

Answer 10

The reverse lockout solenoid on Demco coupler #DM8750311 is the bypass type, normally closed. I have included a picture showing it. You can see the hose that runs back to the master cylinder.

view full answer...

Answer 11

We have the perfect replacement for your Global Direct GDC-80 brake actuator. Since you mentioned "down tongue" I believe you were referring to having an actuator with drop. If you have disc brakes, the best option is the Demco Hydraulic…

view full answer...

Answer 12

For your Magic-Tilt tandem axle boat trailer with disc brakes and a straight tongue I recommend Titan Disc Brake Actuator Coupler #T47457207K. This 7K bolt-on coupler has an electric lockout and I like it because it features a multi-ball fit so it…

view full answer...

Resetting a Titan Surge Brake Actuator # T4747200

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching