Availability of Rear Mount Trailer Hitch for 2012 Honda Pilot
Question:
My friend has a 2012 honda pilot. I can not find a trailer hitch rear for it anywhere started with you do they not make an aftermarket hitch for this car?
asked by: Rick
Expert Reply:
The 2012 Honda Pilot should have been equipped with a factory trailer hitch, which is why you're unable to find an aftermarket model. Check the rear bumper fascia for a removable panel or door that is hiding the hitch receiver. Once removed, the receiver tube should be visible.
If you crawl under the vehicle and look up at the underside right behind the rear bumper, you should be able to see the hitch.
If your friend is planning on using the hitch for towing, a trailer wiring harness like # 118265 for a 7-way or # 118558 for a 4-pole connector would need to be installed. A ball mount would also be needed. Part # 2753 would likely work well, but I've linked you to an FAQ article that explains how to determine which ball mount would work best for your needs. A pin and clip like # PC3 and a trailer ball like # 63845 for a 2 inch ball or # 19260 for a 1-7/8 inch ball would also be needed.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How Do I Know If My 2013 Honda Pilot Has Factory Tow Package
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 7-Way Trailer Wiring Kit for 2015 Honda Pilot
- Q&A: Center Drain Line To Front Dimension For The Dometic Full-Timer Elongated Bowl RV Toilet
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Comparing 77-1210-2 and 23-450/23-451 Trailer Braking Assemblies
- Q&A: Parts Recommendation to Tow a Trailer with a 2016 Honda Pilot
- Q&A: How to Install a Transmission Cooler on a 2016 Honda Pilot with the 9 Speed Transmission
- Q&A: Replacement Grease Seal for Transcom TCM22333TBN
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: My Trailer Hitch Doesn't Fit