Is No-Drill Mount Bracket Required to Install 7-Way Upgrade Kit on a 2022 Subaru Outback Wagon

Question

Question:

Unsure of all parts needed? I have a 2022 Subaru Outback with factory install tow bracket and factory 4 way wiring plug. I’m installing the Tekonsha Prodigy RF wireless brake controller. In my trailer cart I have 7 way adapter ETBC7L. I watched the etrailer YouTube install video and I see a no drill bracket - part 18140 is also added. Is this no drill bracket an absolute necessary part for the 7 way adapter on a 2022 Outback with factory 4 way and tow hitch? Or - is the extra bracket just another option for the install location? I’m unsure if this part is required. I’ve added it to my cart but don’t want to unnecessarily spend another $$ if it isn’t needed. Thanks.

asked by: Steve W

0

Expert Reply:

Hey Steve, thanks for reaching out!

The No-Drill Mount # 18140 is only necessary if you don't already have a way or place to attach the mounting bracket that comes with the 7-Way RV Upgrade Kit # ETBC7L, otherwise the bracket and 4-Way/7-Way socket will just be dangling at the back of your 2022 Subaru Outback Wagon.

expert reply by: Jon G

0

Answer 1

I do have a simple option for you but there is not a custom fit 7-way wiring harness for the 2020 Subaru Outback Wagon. The easiest way to get a 7-Way plug and brake controller on the 2020 Subaru Outback Wagon is to use Tekonsha 4-Pole flat trailer…

view full answer...

Answer 2

To convert the 4-way of your 2021 Subaru Outback Wagon to a 7-way and wire it up so that you can install the Echo #C51180 you'd need the part #ETBC7L which we put together as a kit for the Echo and people with 4-ways like your vehicle. I attached…

view full answer...

Answer 3

If you intend to use the #ETBC7L kit with the Curt Echo Wireless Brake Controller #C51180, you do not need to connect the yellow wire at all. All you will need to do is run the single black wire that comes with the kit from the black wire on the back…

view full answer...

Answer 4

Yes, a standard manual brake controller wire can be routed in your 2021 Subaru Outback Wagon with a Universal Installation Kit for Trailer Brake Controller #ETBC7. The wires will need to be in your cabin. While it is not required to run the backup…

view full answer...

Answer 5

When installing a trailer wiring connector on your 2023 Subaru Outback Wagon I recommend The T-One Vehicle Wiring Harness #118467 because it has a stronger power converter box over the other wiring options for your vehicle. The harness plugs into…

view full answer...

Answer 6

For a hitch that fits your 2023 Subaru Outback Limited XT I recommend the etrailer Trailer Hitch Receiver #e25TR. I know you asked for a Class IV hitch, but that is not necessary. This Class III hitch has a max towing capacity of 3,500 lbs, which is…

view full answer...

Answer 7

Since the wiring for the reverse lights on your 2022 Subaru Outback are in the rear hatch door you will need to access the wiring where it travels from the hatch door into the vehicle. The best way to identify the correct wire is with a Test Light…

view full answer...

Answer 8

Thanks for the picture of the 7-way on your boat. From that I can tell you have a reverse light circuit active on it so what you'll need is to first start with a 4-way on your 2020 Outback like part #C56040 and then convert it to a 7-way with…

view full answer...

Answer 9

First you will need a Tekonsha T-One Vehicle Wiring Harness #118467 if you do not already have a 4-way flat connection on your 2022 Subaru Outback. This connects to the factory connector in your rear cargo area for a simple installation and will take…

view full answer...

Answer 10

I am happy to explain why the yellow wire and blue wire are tucked away in the installation video of 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part #ETBC7L. The ETBC7L is a kit used to install the Curt Echo Wireless controller…

view full answer...

Answer 11

I tried looking up the JS560 plug that you mentioned having on your 2009 Chevy C8500 and while I wasn't able to locate anything, we still have a solution for you to use the Curt Echo Brake Controller #C51180. If your JS560 plug is the standard…

view full answer...

Answer 12

I have a better option for you, but after reaching out to Tekonsha and Curt it is not recommend to splice into the brake light wire on a 4-way connector like the #C56040 for your 2021 Subaru Outback as it would be pulling power before the converter…

view full answer...

Is No-Drill Mount Bracket Required to Install 7-Way Upgrade Kit on a 2022 Subaru Outback Wagon

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching