What Frame Dimensions Does Buyers Products Hitch Plate # 3371809061A Fit  

Hey James, dimensionally the Buyers Products hitch plate part #3371809061A will match up to the frame rails of your International but beyond that most likely would need to get welded in place as the holes wouldn't line up.

I would be happy to help you with that. I went out to the warehouse and took some measurements of the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065. The distance between the two wings on the top outside edge of the…

If your 2008 Chevy Silverado initially came with the cab and chassis body then you should be able to use the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC #3371809065. This is for the 3500 model and measures 17" tall by…

Per Buyers Products' website, this hitch plate #3371809061A measures 17.2" tall by 62" long at the bottom and 34-1/4" long at the top (measured from inside the mounting bars) and is constructed with 1/2"…

I had the Buyers Products Hitch Plate with 2-1/2" Receiver Tube part #3371809061A measured for you and the receiver tube sticks out 3-1/2" from the face of the plate.

The width of the tab you marked in your picture is 2.9" and the height is 6.32". I have attached the full dimensional drawing of the #3371809065 below for your reference.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…