Is 2023 Hyundai Tucson EcoHitch Hidden Hitch Receiver All Stainless Steel of Just the Receiver

Question

Question:

Is the eco hitch all stainless steel or just the square receiver tube itself?

asked by: Shawn

0

Expert Reply:

Hey Shawn, thanks for reaching out!

The EcoHitch Hidden Trailer Hitch Receiver # EH98SR for your 2023 Hyundai Tucson uses stainless steel for the full center receiver, the chain plate, and center section of the cross tube - everything else is normal steel according to my contact at EcoHitch.

expert reply by: Jon G

0

Answer 1

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 2

It sounds like you're looking for a trailer hitch for a 2023 Hyundai Tucson and if that's the case we have some great options. I recommend the etrailer Trailer Hitch Receiver part #e38KR which offers a bolt-on install without any drilling or…

view full answer...

Answer 3

I recommend installing the etrailer Trailer Hitch Receiver #e38KR on your 2023 Hyundai Tucson. This receiver unlike others has a matte black finish which blends in much better with the factory fascia. It also has a hidden cross tube providing for a…

view full answer...

Answer 4

Sure do! You'll need the Curt #CU94FR which is a custom fit plug and play installation for your 2023 Hyundai Tucson, and will give you the 4-way connector you need to hook up your trailer. You'll also need the 4-way mounting bracket #BK4F and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Is 2023 Hyundai Tucson EcoHitch Hidden Hitch Receiver All Stainless Steel of Just the Receiver

Product Page this Question was Asked From

Continue Researching