Is There a Wiring Harness Comparable to Mazda KMV6V7780 For a 2024 CX-90?

Question

Question:

Im looking for wiring for CX90 PHEV. Is this same as the Mazda Tow Hitch Harness, 7-Pin, Part Number: KMV6V7780, does it support all the functions as the mazda part?

asked by: Aroon

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness # C24ZV you found is only going to provide your 2024 Mazda CX-90 with a 4-way flat. We do not have a 7-way option like the Mazda part number KMV6V7780. Instead we have the 7-Way Kit # ETBC7 which will connect to the Curt 4-Way and also provides you with additional wiring and circuit breakers for the charge line and a Brake Controller # RED52VR.

expert reply by: Bud M

0

Answer 1

The Curt #C59236 wiring you've found for your 2024 Mazda CX-90 is a universal wiring kit that essentially fits any vehicle on the market since it requires splicing into the OEM wiring of the vehicle for the installation. The Curt 56494, which is…

view full answer...

Answer 2

Since the Curt 4-way kit part #C24ZV plugs into the factory trailer wiring port it would put the vehicle into trailer mode when towing a trailer like you are wanting it to.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...