Recommended Suspension Upgrade for a 2024 Toyota Tundra

Question

Question:

I will have a 2024 tundra limited 4x4 TRD hauling a 1500 lb camper. Do you recommend the severe kit? I can remove them when not using the camper. Do the coil springs on the 2024 make any difference on what model to order?

asked by: Roger

0

Expert Reply:

For your 2024 Toyota Tundra, I recommend the Timbren Active Off-Road Bumpstops item # T83MR because they are the lowest capacity options for Timbrens. They will still offer you plenty of support but you definitely do not need the severe kit.

These mount on the side of the frame next to your coil springs so there won't be any interference.

expert reply by: Jerred H

0

Answer 1

For your 2024 Toyota Tundra, I recommend the Timbren Active Off-Road Bumpstops item #T83MR because they are the lowest capacity options for Timbrens. They will still offer you plenty of support but you definitely do not need the severe kit. These…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 5

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install…

view full answer...

Answer 6

The best Timbren kit for your 2024 Toyota Tundra is the Timbren Suspension Enhancement System #T45MR rated for 6K. The Off-Road kit and the 7K kit will have the Timbren bumpers engaging a bit quicker than what you'll need with standard vehicle…

view full answer...

Answer 7

For your 2023 Toyota Tundra, the best suspension enhancement, particularly for towing, are the Timbrens, with the correct part number for your '23 Tundra being the following: - Timbren Suspension Enhancement System - Rear Axle #T45MR What the…

view full answer...

Answer 8

Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.

view full answer...

Answer 9

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

I do have an option for you but there isn't really any tie-down kits designed specifically for the Rextrax XR Tonneau Covers. That said, we have heard back from customers that the Tie-Down Kit for TruXedo Elevate Rack System part #TH52FR is…

view full answer...

Answer 12

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Recommended Suspension Upgrade for a 2024 Toyota Tundra

Product Page this Question was Asked From

Continue Researching