Is There BAK Tonneau Cover that Fits 2018 Ford F-150 6.5 ft Bed with TracRac Ladder Rack

Question

Question:

I have a 18 F150, 6.5 bed with a BAKFLIP MX4 installed. I was looking at the Thule TracRac SR. Will that fit with that cover installed? I saw mixed reviews. Also, do you offer a military discount for active duty members? Thanks Josh

asked by: Josh

0

Expert Reply:

Hey Josh, so we do have a BAK tonneau that fits your 2018 Ford F-150 6-1/2 foot bed and the Thule TracRac SR part # TH43002XT-501EX with the Bak Revolver part # BAK27ZR but the BakFlip won't fit well as the panels would hit the uprights.

I am not sure why exactly but we do not have a military discount at this time.

expert reply by: Jameson C

0

Josh

4/18/2024

Recommendations for a rack system that fits the BAK MX 4?

Reply

Jameson C.

4/18/2024

@Josh We have the Adarac Pro Series part # A58RR which is black and the # A4000946 which is silver. These are only options that will work since they install through the top of the bed rails and have totally vertical uprights.

Reply

Answer 1

First of all, thank you for your service. Unfortunately at this time we don't offer a military discount, but we do have free shipping most of the time on orders like this one. To confirm your fit, we have two sets of jounce springs available from…

view full answer...

Answer 2

Great question. To get the proper Item and fit I will need to know the size and shape of the feet on your system. Are they round, square, rectangle. Do they have a lip or raised edge or are they complete flat and level? The SnapPad XTRA Jack Pads for…

view full answer...

Answer 3

It is; the BAKFlip MX4 Hard Tonneau Cover #BAK48121 that fits your 2015 GMC Sierra 1500 is indeed compatible with the TracRac SR. The reason why is the MX4 installs inside your Sierra's bed rails, leaving the top free, and the TracRac installs on…

view full answer...

Answer 4

Usually ladder racks use the inside edge of the top of the bed site to attach to the vehicle, but luckily there are exceptions to that. The Thule TracRac SR is typically compatible with tonneau covers that mount to the inside edges of the truck bed.…

view full answer...

Answer 5

I do have some options for you but the Thule TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-508 and the BAKFlip MX4 Hard Tonneau Cover part #BAK48329 are not a good fit. The rails on the SR are rather wide so they would likely overlap with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Josh, so we do have a BAK tonneau that fits your 2018 Ford F-150 6-1/2 foot bed and the Thule TracRac SR part #TH43002XT-501EX with the Bak Revolver part #BAK27ZR but the BakFlip won't fit well as the panels would hit the uprights. I am not…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...