How Does the WeatherTech ImpactLiner Stay in the Truck When there Is no Load Weighing It Down

Question

Question:

What holds this liner down when nothing is on it .

asked by: Jeff W

0

Expert Reply:

Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat # WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket.

Basically, one the ball end would get stuck to the inside of your truck bed behind the mat, and the socket side would snap the cover to the ball from the other end, sort of sandwiching the two together.

expert reply by: Bryce D

0

TechHold Retention Device
(click to enlarge)

Answer 1

Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat #WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket. Basically, one the ball end would get stuck to the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Thanks for the picture! For your 2023 GMC Sierra 1500 with adaptive ride control you'll want the Air Lift LoadLifter 5000 Air Helper Springs item #AL57388. This air bags have a 5,000 lbs load leveling capacity that will keep the rear end of…

view full answer...

Answer 5

Hello Steve. I do have a good solution for you, but I cannot recommend using the Malone Adapter #MPG544. Since it is rated for towing only 4,000 lbs, your 8,000 lb towed vehicle would be double the max towing capacity. You are right about there…

view full answer...

Answer 6

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 7

In order to install Rhino-Rack HD bars on your 2023 GMC Sierra 1500 you'll need the following parts: - 59" HD Crossbars #RB1500B-2 - 2500 Series Legs for HD Bars #RRRLKHD - DK Fit Kit #DK427 I'm not 100% sure what multi-purpose holders…

view full answer...

Answer 8

The air bag kit I recommend going with to fit the Adaptive Ride Control on your 2022 GMC Sierra 1500 Limited is the Firestone Ride-Rite Air Helper Springs #F2609. Even though there are a limited amount of air bags that fit your vehicle, the Firestone…

view full answer...

Answer 9

The Firestone Ride-Rite Air Helper Springs #F2609 is the only kit that we have that will fit your 2020 GMC Sierra 1500 Denali with the adaptive ride control. These have a 5,000lb capacity to enhance your factory suspension under load. This will not…

view full answer...

Answer 10

Yes, there is another option to add a brake controller to your Sierra. Since you have the factory tow package, I recommend the Curt Echo In-Line Wireless Brake Controller item #C79DR. The controller plugs in behind your 7-way with included…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

For air springs there isn't a differentiation between Denali and and standard models on the 2021 GMC Sierra 1500. These kits do have fitment requirements based on whether or not you have 2WD or 4WD, an in-bed hitch, AT4 trim package, and adaptive…

view full answer...