Torque of Bolts Installing Hitch on 2023 Toyota Highlander

Question

Question:

Just ordered e75ZR for 2023 Highlander XLE. Getting organized for installation and need to know correct torque for tightening the six mounting bolts? Thanks!

asked by: Mark G

0

Expert Reply:

Per the linked installation instructions which you can click below the torque is 86 ft-lbs for the 12mm hardware when installing the etrailer Trailer Hitch Receiver # e75ZR on the 2023 Toyota Highlander.

expert reply by: Kyle S

0

Mark G.

4/10/2024

Thanks Kyle!

Reply

Answer 1

For a 2021 Toyota Highlander XLE we have the Curt Hitch part #C99FR, the etrailer hitch #e75ZR, the Curt Hitch #C45CR and the EcoHitch part #EH35VR as a confirmed fit. All of these fit hybrid models as well. The Curt #C45CR has the highest capacity…

view full answer...

Answer 2

The only trailer hitch option we offer for a 2020 Toyota Highlander that will allow a full-size spare wheel/tire to be reinstalled is the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH35VR. The Curt trailer hitch…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 8

I would be happy to help clarify the confusion and set your 2022 Toyota Highlander XSE up with a hitch for your bike rack. The etrailer Trailer Hitch Receiver item #e75ZR does fit your Highlander XSE. This hitch is custom fit and bolts directly to…

view full answer...

Answer 9

The EcoHitch #EH84GR is indeed a fit for the 2021 Tesla Model 3, it'll work great for you. When the removable receiver is detached, the hole in the underside of the bumper fascia can indeed be covered using part #306-XA2002. I've provided a…

view full answer...

Answer 10

Since your 2024 Toyota Grand Highlander doesn't come with the factory tow package you need the Curt T-Connector Vehicle Wiring Harness #C79VV. The module plugs into that 10-Pin connector you found under the cup holder and then the 4-Way harness…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

In regards to the etrailer Trailer Hitch Receiver part #e75ZR for a 2023 Toyota Highlander, you must trim the underbody panel per the manufacturer. The hitch will come into contact with the panel if not trimmed. The panel however does not need to be…

view full answer...