Will TruXedo Elevate Truck Bed Rack System Fit 2021 GMC Sierra 1500 With 5-3/4' Bed

Question

Question:

I have a 2021 GMC Sierra 1500 Crew cab with the multipro tailgate and 5’8” bed. Will this rack fit and would I still be able to use my roll up tonneau cover?

asked by: Jonathon S

0

Expert Reply:

The TruXedo Elevate Truck Bed Rack System will fit your 2021 GMC Sierra 1500. However, the # TX24NV is not the correct rack and lacks the rails for installation. What you need is the # TX96NV. This rack is compatible with the following tonneau covers:

BAK: FiberMax, F1, G2, HD, MX4, Revolver X2, Revolver X4, and VP
Extang: Encore and Exceed
Retrax: One XR with T-slot and Pro with T-slot
Truxedo: Lo Pro, Pro X15, Sentry, and Sentry CT

If your exact cover isn't on this list you will need to check to see if it is an inside-mount cover. Most covers that install inside the bed rails are going to work with this ladder rack. If it mounts on the top of the bed rails then you will need a different tonneau cover like the # TX64FR or # TX1572416 if you want to use a ladder rack.

expert reply by: Robin H

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 3

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 4

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 5

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 6

There are roll up tonneau covers that can work with the Truxedo Elevate Ladder Rack part #TX96NV but since I don't know which one you have specifically it's hard for me to say. Here's a list of all of the covers this is designed to fit:…

view full answer...

Answer 7

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 8

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 9

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 10

Hi Nathan, The Rhino-Rack Roof Rack Legs #RRRL110S5-2 are a fit for the gutters on your 2023 Jeep Wrangler, but they are only 4-5/16" tall so you'd likely run into clearance issues with the sky top. To confirm you can measure up 4-5/16"…

view full answer...

Answer 11

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Answer 12

For your 2023 Jeep Wrangler Unlimited we have the Rhino-Rack Vortex Aero roof rack. This has the additional clearance needed to still allow you to use your Sky One-Touch top with the crossbars in place. To complete the roof rack you will need the…

view full answer...