Trailer Hitch, Ball Mount And Wiring Options For A 2004 Volvo XC70
Question:
Re: 2004 Volvo XC70 25T AWD Wagon VIN YV1SZ59H541171910 Hi, 1. Id like to install a trailer hitch and tow bar using your products - can you provide part numbers? 2. Id like to use a Genuine Volvo Wiring Harness Part Number: 8633887 it is a 13 Pole - do you have a mount for this large harness to attach to the tow bar and do you have a 13 pole to 4-way flat adaptor? Thanks Don
asked by: Donald A
Expert Reply:
Hello Donald, we can definitely set you up with a hitch and ball mount for your 2004 Volvo XC70. For a hitch I recommend the Curt Class 2 Hitch # C12318. This hitch has a 1-1/4" receiver and is rated for towing up to 3,500 lbs or 350 lbs of tongue weight.
For a ball mount you can use the Draw-Tite # 36071, along with part # F-4 for a pin. Then you can use part # 19258 for a 2" ball, or part # 19257 for a 1-7/8" ball.
As far as the Genuine Volvo Wiring Harness Part Number 8633887, we do not offer any brackets or adapters that are compatible with this 13-pole plug. That would be something that Volvo would have to provide. We do have wiring solutions for the 2004 Volvo XC70 like the Curt # C59236 but this is not like the OEM harness and this would require cutting and splicing if the vehicles harness.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 2-3/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-3/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Hitch Installation Tips
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Locating Factory Weldnuts on 2003 Volvo V70 to Install Curt Trailer Hitch # C12318
- Q&A: Availability of 2 Inch Receiver for 2004 Volvo XC70
- Q&A: Trailer Hitch and Bike Rack that Fits 2003 Volvo V70
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Trailer Hitch, Wiring and Ball Mount Recommendation for 2005 Volvo XC70
- Q&A: Will the Thule Passage Bike Rack part # TH910XT fit a 2005 Volvo XC70
- Q&A: Trailer Hitch Recommendation for 2006 Volvo XC70
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)