Can Roadmaster Comfort Ride Fit 2018 Primetime Lacrosse 3360

Question

Question:

Hi will this fit a 2018 primetime lacrosse 3360 travel trailer? Thanks Mike

asked by: Mike G

0

Expert Reply:

Hey Mike as long as your 2018 Primetime Lacrosse has 3 inch diameter axles the Roadmaster Comfort Ride part # RM-2460-2560 is going to fit and work great.

expert reply by: Jameson C

0

Answer 1

Since the install of the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2560 uses the existing hangers on the trailer for the very front and very back a set wheelbase isn't stated with this kit. Basically…

view full answer...

Answer 2

I do have options for you but the Roadmaster Comfort Ride Leaf Spring Suspension Kit won't work with this wide axle apread configuration. Instead, the best option we offer is to add the shock absorbers from this kit which are sold separately,…

view full answer...

Answer 3

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

view full answer...

Answer 4

To answer your first question, we have not changed the axle locations to the bottom of the axle set with the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers #RM-2450. As for the potential ground clearance issues, it is important to…

view full answer...

Answer 5

There really isn't any harm in adding both the Equa-Flex Cushioned Equalizers, like part #LC279688, along with the Comfort Ride Shock Absorbers, like part #RM-2450. In fact, Roadmaster has their Roadmaster Comfort Ride Leaf Spring Suspension…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Mike as long as your 2018 Primetime Lacrosse has 3 inch diameter axles the Roadmaster Comfort Ride part #RM-2460-2560 is going to fit and work great.

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye…

view full answer...

Answer 10

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 11

It looks like your MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR are longer than your previous equalizers were because your leaf springs are way too close to each other. The shackles should be creating more of a "W" shape instead…

view full answer...

Answer 12

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Can Roadmaster Comfort Ride Fit 2018 Primetime Lacrosse 3360

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching