Hanger Placement with 3,500 lb Axle with Hanger Kit part # APS4 On Trailer with Axles Under Springs
Question:
I recently purchased hanger kit part# APS4 and am preparing to mount it to my 3,500 lb trailer axle and frame. The diagram on the product page list different hanger spacing requirements depending on the axle the hanger kit is going to be used with. In my application the leaf springs rest on top of the trailer axle unlike the diagram picture that is shown on your website. Does this change the spacing recommendation/requirement for the hangers? Please let me know when you can. Thank You,
asked by: Patrick B
Expert Reply:
Your axles being under the leaf springs will not change the hanger location recommendations listed for the Single Axle Hanger Kit part # APS4. You would want to have the hangers 25-3/4 apart measured on bolt center.
However, since your axles are below the springs you would not need to have 5 inches between the center of the axle and the trailer frame.
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APS4 Review
- Q&A: How Far Apart Should Hangers be Mounted for 27 Inch Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Oval - Red Lens
- Article: Where to Position the Trailer Axle?
- Q&A: Hanger Distance Recommendation for Trailer Leaf Spring that Measures 25-1/4 inches
- Q&A: What Torque Should My Suspension Components Be Tightened To?
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Do the Shackle Straps Go Inside or Outside the Leaf Spring Hanger
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Q&A: Parts Needed to Add Brakes to Single Axle Boat Trailer
- Video: Review of CE Smith Trailer Leaf Spring Suspension - CE14026G
- Video: CE Smith Trailer Suspension CE20044G Review
- Video: TruRyde Trailer Suspension TRBU11561 Review
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Video: Redline Trailer Suspension SP01-160 Review
- Q&A: What Size Bolt-On Leaf Spring Hangers Are Available
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: sp~169275
- Article: Printable Trailer Bolt Hole Pattern Template