Is 55" Lock Side-Door Bar Lock Assembly # 3057-55 the Same as # 305736 Except for Longer Length

Question

Question:

Ive got a broken door bar latch on my cargo trailer that Im looking to replace the handle weld broke off the pipe. The cam bar on the trailer is 55inch so it looks like your product 3057-55 is what Im needing. However, there are no pics of that product that will help me to verify that its what Im looking for. You also have a 3057-36 which does appear to be the right thing though the wrong length. Are these two products the same but with a different length pipe? Just wanting to verify that before I order it. Thanks!

asked by: Steve K

0

Expert Reply:

Yes, the 55" Lock Side-Door Bar Lock Assembly # 3057-55 that you referenced would be the correct replacement handle to replace what is on your trailer.

Its the exact same thing as the # 3057-36 that you also referenced except with a 55 inch length bar instead of 36 inches like the # 305736.

expert reply by: Jameson C

0

Answer 1

It sounds like the hooks on your safety chains are not large enough to fit around the safety chain loops on your trailer hitch. If that is the case then I recommend the Buyers Products 3/8" x 35" Class 4 Trailer Safety Chain part…

view full answer...

Answer 2

The solution you came up with is the best solution to allow you the needed tailgate clearance. The Equal-i-zer shank part #EQ90-02-4600 will give you the clearance you need and while it is longer the added length would not significantly change the…

view full answer...

Answer 3

I don't have any way of looking up what specific locks were used on your Forest River 16BHS, but I can say that Global Link provides most of the entry door lock sets for later model RV/Campers. The lockset fits doors that are 1-1/4" to…

view full answer...

Answer 4

That appears to be the Aluminum Eagle wheel from Lionshead. We currently only carry this wheel in an 8 lug 16" x 7". Our most similar wheel in a 15x6 is the Aluminum Liger Trailer Wheel #LH49FR. This is similar in design and color to your…

view full answer...

Answer 5

Yes, the Heavy Duty Equalizer Suspension Kit part #K71-360-00 does fit your 2008 Weekend Warrior 300FS that has a triple axle setup and a 35 inch wheelbase.

view full answer...

Answer 6

For your bearings, I recommend the etrailer.com Replacement Trailer Hub Bearing #LM67048. For your seals, I can't find the part number or dimensions anywhere, so if you send me dimensions of inside and outside diameters, I'll do what I can to…

view full answer...

Answer 7

For your 2021 Chevrolet Blazer you're going to need to start with a base plate kit. Since there aren't any Blue Ox base plates I'd recommend going with the Roadmaster Direct-Connect Base Plate Kit #RM-523204-5. These are just as good as…

view full answer...

Answer 8

That would depend on several different factors such how much the door sticks out away from the trailer and how much the handle sticks out away from the door. However, if you do run into clearance issues you can always install a spacer on the hinge…

view full answer...

Answer 9

Yes, the Dexter E-Z Flex Equalizer #K71-655-00 will indeed work with the standard 1-3/4" wide double eye leaf springs.

view full answer...

Answer 10

We do offer a few of the 7-3/4" long equalizers with 3 9/16" holes. Unfortunately, the standard equalizers in this size like the #TREQE1 are not greaseable. There is the Dexter E-Z Flex Equalizer #K71-655-00 which is a 7-3/4" long…

view full answer...

Answer 11

I have a great solution for using a weight distribution system with your new V-nose cargo trailer. I recommend using the Reese Chain Hangers #RP58305 with the weight distribution system you choose. These brackets can either be bolted onto or welded…

view full answer...

Answer 12

The closest thing we have to a 2" x 2" bumper is the Rubber Bumper for Enclosed Trailer Ramp Door #37210715 you looked at. This has a 2-1/2" diameter with a height of 1" and a 3/8" mounting hole.

view full answer...