Is Prime Guard Red Bearing Grease Compatible With Lubri-Matic Blue Bearing Grease

Question

Question:

I am presently using Lubrimatic 11380 wheel bearing grease that is blue. Is the red Prime 11380 wheel bearing grease which is red compatible? Thanks Paul

asked by: Jarrett P

0

Expert Reply:

The LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red # L11380 is listed as the replacement for the 11380 and is made with a Polyurea base just like the Lubri-matic 11380 Blue bearing grease so it would be a compatible swap out.

expert reply by: Kevin C

0

Answer 1

The most common trailer grease base is Petroleum. If you don't know what is in your hubs currently then it's best to repack everything with new grease so you don't run into issues. You should be doing this once a year anyhow. I recommend…

view full answer...

Answer 2

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 3

I attached a chart that has the automotive cross reference for the Kodiak disc brake pads part #K2250CP that you referenced under the yellow heading. Probably the easiest to look up would be 1982 to 1992 Chevy Cavalier.

view full answer...

Answer 4

Usually when you replace parts that get lubricated, you clean all of the existing grease first before adding any new grease, just in case there is a compatibility issue. Since you are using Dexter axles and replacing components with Dexter parts, the…

view full answer...

Answer 5

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

view full answer...

Answer 6

I reached out to my contact at Kodiak regarding the Disc Brake Kit #K2R1058D11E and he said the rotor/spacer bolts need to be torqued down to 90 foot pounds and the caliper clip bolts will be torqued down to 45 foot pounds. I have attached a video…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Is Prime Guard Red Bearing Grease Compatible With Lubri-Matic Blue Bearing Grease

Product Page this Question was Asked From

Continue Researching