bing tracking image
Q & A Icon

Recommended Trailer Wheel Bearing Grease for Dexter Axles  

Question:

I want the grease I apply to my new Dexter Axle wheel bearings to be compatible with the factory applied grease. What type grease is used in the OE assemblies so I can be sure what to buy for periodical greasing! I have a 2011 Horton 6x10 with Dexter 3,500 lb brake axles and E-Z-lube axles! I also want to buy a spare brake hub assembly but my manual does not list what Dia. brake hub I have! Your assistance is greatly appreciated on these items.

0

Expert Reply:

Usually when you replace parts that get lubricated, you clean all of the existing grease first before adding any new grease, just in case there is a compatibility issue. Since you are using Dexter axles and replacing components with Dexter parts, the grease will be compatible.

For wheel bearing grease, use # L11465, or # L11380. This is a polyurea-based grease that is compatible with most grease formulas of the same or similar chemical makeup. Take a look at our grease help article, linked to the right, that includes a compatibility chart.

For the hub assembly, I would need the bearing numbers stamped into the inner and outer bearings. With those numbers and the wheel bolt pattern, I should be able to find the correct part.

expert reply by:
0
Michael H

Wylie

8/6/2020

I talked to Dexter and they said they use Red synthetic Lithium 2 grease from the factory. All of the comparability charts I have read say Lithium complex and Polyurea are not compatible.

Etrailer Expert

Chris R.

8/17/2020

You're right - in this instance you'll either need to clean out the existing grease completely before applying the Polyurea grease or simply go with the Dexter recommendation # L11390.

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>