How Large of a Spool Does The Deka Wire # DK74FR Come In?

Question

Question:

How much wire comes in a spool?

asked by: David

0

Expert Reply:

We sell the Deka Wire # DK74FR by the foot as we get it in spools of 500 feet.

expert reply by: Bud M

0

Answer 1

That is a valid question. We strongly recommend people use 10 gauge wire like the part #10-1-1 (sold by the foot), but we realize that there are a lot of people who get by with 12 gauge wire. There are several variables with trailer brake wiring that…

view full answer...

Answer 2

You can put one together, but there isn't a pre-assembled 20 ft 7-way cord for your trailer. You'll need 20ft of #DW04914-1 (sold by the foot, so make quantity 20 to get 20 ft) and the Pollak 7-way #PK12706. I included a wiring diagram for…

view full answer...

Answer 3

The biggest difference between the two junction boxes that you referenced is the number of terminals. The #38656 has 7 and the #PK52248 has 10. For a 7-way I would recommend you go with the 7 pin box part #38656 since there would be no need for more…

view full answer...

Answer 4

The Epicord 7-Way Molded Trailer Plug with Junction Box #277-000141 has the wiring set for the following functions. White-ground Black-12V power Yellow-reverse/auxiliary Red-left turn and stop Green-tail and running lights Brown-right turn and stop…

view full answer...

Answer 5

The issue you are experiencing with the running lights causing the brake lights to cut out is caused by a poor ground as with most trailer lighting issues. That said, when most people check the ground they simply look at the wire and make sure it is…

view full answer...

Answer 6

Yes, the wire colors of the Deka Wire - Jacketed 7-Wire #DK74FR are the industry standards that you mentioned. Black, white, red, green, white, yellow, and blue.

view full answer...

Answer 7

The dimensions on the Pollak 7-Circuit-Breaker Junction Box, part #PK52249, are as follows, With the mounting holes on the left and the right the length (right to left) from one edge of the mounting hole tab to edge of the other mounting hole tab is…

view full answer...

Answer 8

I strongly recommend protecting any circuit breakers, including the Pollak 30-Amp Auto Reset Circuit Breaker, #PK54230, from the elements. Corrosion and road grime can build up on the terminals and cause problems. We typically use junction boxes,…

view full answer...

Answer 9

The brake wires can be spliced together and have one wire run to the junction box if that is easiest for you. On a single axle you could also have separate brake wires for both sides if you wanted to but most of the time there is a single wire out to…

view full answer...

Answer 10

You can convert your drop axles to get more height by attaching your leaf springs to the top of the axle. The height you gain will be the thickness of your leaf springs and the diameter of your axle. For example, if your leaf springs are 1-1/2 inches…

view full answer...

Answer 11

The difference is found in the application. The Slipper Spring styles, like part #SP-179275, are intended for use with more heavy duty applications, while the Double Eye styles, like part #e77SR are used to provide a more comfortable ride. The part…

view full answer...

Answer 12

While I was unable to confirm who manufacturers the Defender 2 brake away system on your 2021 Big Tex 60EC. I do agree that the Bright Way Push-to-Test Trailer Breakaway Kit #3802346 does look identical minus the decal and they have the same wiring…

view full answer...

How Large of a Spool Does The Deka Wire # DK74FR Come In?

Product Page this Question was Asked From

Continue Researching