Will The Replacement Monitor FR47FR Work With The Furrion Vision S Camera System On My Camper?

Question

Question:

I have a camper with the Furrion Vision S rear and side cameras on it, but the previous owner kept the monitor and power cable and mounts. will your Item # FR47FR work with the cameras already installed on my camper? thanks

asked by: Curtis L

0

Expert Reply:

Yes, the Replacement 7" Monitor # FR47FR will indeed work with the Furrion Vision S Camera system already installed on your camper. It sounds like you are also going to need the Replacement Monitor Power Cable # C-FOS07TAPK-006 and the Replacement Suction Cup Mount # FR79SR.

expert reply by: Jesse M

0

Answer 1

If you have the Furrion Vision S camera system then the correct replacement 7" monitor is part #FR47FR on our site. I believe those part numbers you found have to do with different camera kit options that monitor can come with. Attached is a…

view full answer...

Answer 2

The Replacement 7 inch monitor you'd looked at, part #FR47FR (which is Furrion's part #FOS07TAPK-008 is indeed a correct replacement for your original monitor. According to Furrion, it will be compatible with your existing system, as well as…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...

Answer 5

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...

Answer 6

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

view full answer...

Answer 7

The Air Lift WirelessONE Compressor System #AL25980EZ and Air Lift WirelessONE Compressor System #AL25980 are nearly identical with only some very minor differences in CFM and duty cycle ratings. The #AL25980EZ will also come with an easier mounting…

view full answer...

Answer 8

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 9

The correct battery disconnect to use for your 2021 Chevy Silverado 1500 is the Roadmaster Automatic Battery Disconnect with Switch #RM-766. This makes disconnecting your battery as easy as pressing a button instead of having to physically get under…

view full answer...

Answer 10

I spoke with Fogatti about your Fogatti RV Tankless Water Heater #LSB44FR giving an E8 code even though your exhaust isn't clogged and they recommend that you try to adjust the HC parameter values.

view full answer...

Answer 11

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 12

You can absolutely install an aftermarket trailer brake controller to your 2021 Chevy Silverado 1500 with the factory tow package, so whoever told you that had some bad info. And since you have the factory tow package you can simply add a plug and…

view full answer...