Is Timbren Axle-Less Trailer Suspension System # A4WS440 Rated for 400 Pounds Total

Question

Question:

i am looking to attach these to a frame which will be mounted to a repuposed 500 gallon propane tank. tank weight is roughly 845 pounds. the axiol less suspension devices state 400 pound capacity. is this capacity for the set, or each? i need 4 devices so the question becomes am i getting 1600 pounds of suspension, or am i getting 8oo pounds of suspension? indeed if each device is good for 400 pounds do you have devices which have a lower rating perhaps in the 250 -300 pound area?

asked by: David L

0

Expert Reply:

The 400 pound capacity for the Timbren Axle-Less Trailer Suspension System # A4WS440 is for the set not for each. If you were to get two sets of these that would be a total capacity of 800 pounds.

You would need to go up to the next highest capacity, # A12RS440, rated for 1,200 pounds for one set.

expert reply by: Michael H

0

Answer 1

To see if any of the 2000 lb axles we offer will work for you, I'll need to know the center spring seat to spring seat distance (which you've kindly provided) as well as the hub face to hub face dimension. I've provided a diagram showing…

view full answer...

Answer 2

We don't have an axle compatible with center of spring to center of spring dimension of 42 inches. We do however have an axle-less system that will work. I recommend the Timbren Axle-Less Trailer Suspension System with Hubs - 4 on 4 - Regular…

view full answer...

Answer 3

I recommend checking the alignment of your spindles before purchasing a new axle. Unless there is something wrong with the system itself, it may only need to be realigned. An easy way to check the alignment at home is to measure from the end of the…

view full answer...

Answer 4

If you are looking for axles with 48 inches spring-center-to-spring-center length, we offer several but they have a weight capacity of 2,000 or 2,200 lbs. I have attached a link to the product page for these axles you can check out. The closest we…

view full answer...

Answer 5

The 1,200 lb weight capacity of the Timbren part #A12RS440 is the axle capacity which means the capacity of both sides together. This is a solid choice to replace a Torsion setup so this would work great for you.

view full answer...

Answer 6

The Timbren Axle-Less Trailer Suspension System #A12RS440 that you referenced can definitely be used on the highway.

view full answer...

Answer 7

I may have solution for you but unforunately we don't carry an axle with those measurements. If you'd like a traditional axle you might be better off sourcing one locally so it can be ordered with the exact specs you need. Another option is a…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 10

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 11

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Is Timbren Axle-Less Trailer Suspension System # A4WS440 Rated for 400 Pounds Total

Products Referenced in This Question

Continue Researching