5th Wheel to Gooseneck Adapter to Replace Lippert Turning Point Pin Box on Jayco HT 30.5 CKTS

Question

Question:

I’m looking to replace the Curt Turning Point on my 2023 Jayco Eagle HT 30.5 ckts. What gooseneck will work? I have photos of the Lippert frame stickers and Jayco trailer info.

asked by: Mark H

0

Expert Reply:

Hi Mark; thanks for the question and I have some good news for you as we have the exact 5th wheel to gooseneck adapter to replace the Turning Point pin box on your Jayco Eagle HT 30.5 CKTS. The correct part is the following:

- Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY48GR

The # GY48GR was designed specifically to replace the Turning Point, has a 21,000 lb capacity and is for pin weights between 1,500 lbs and 3,500 lbs, which is perfect for your Jayco Eagle.

You made a really nice choice with this upgrade as it's much easier to just use the gooseneck ball in your truck than dealing with a 5th wheel hitch. The only other thing you'll need are Safety Chains # GY49GR.

expert reply by: Kyle S

0

Answer 1

Thanks for the picture and congrats on the new trailer! There is only one replacement option for the Turning Point Pin Box and it is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. Reese doesn't have one. The Gen-Y…

view full answer...

Answer 2

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Thank you very much Jay for providing all the information and images with the tags Jay. I was able to verify with Lippert your 2021 Alliance Valor 40V13 has the bolt pattern for a Rhino Box pin box. I also saw your camper is going to have a dry…

view full answer...

Answer 7

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 8

Thanks for the pictures and information! I just heard back from my contact at Lippert and your 2024 Keystone Cougar has a 1621 pinbox. You will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY58GR you were looking at. You will also need…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 11

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Answer 12

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

5th Wheel to Gooseneck Adapter to Replace Lippert Turning Point Pin Box on Jayco HT 30.5 CKTS

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching