Do the Yakima Replacement Bolts Come w/ Nuts?

Question

Question:

Do the Yakima 2 1/4 bolts come with the nuts to tighten on the ski rack, bike rack etc.?

asked by: Rob U

0

Bolts
(click to enlarge)

Expert Reply:

Thanks for the picture! The Yakima Replacement Bolts - 1/4" x 2-1/4" item # Y80011 do not come with nuts. However, judging by the parts you have in your picture I think you need the Replacement Mounting Hardware for Yakima Roof Mounted Ski and Snowboard Carriers item # 8830021. It fits the carriers manufactured after 2006.

expert reply by: Jerred H

0

Replacement Hardware
(click to enlarge)

Answer 1

The mount itself and the bolts that are included with the Replacement Mounting Hardware #Y8860040 will allow you to attach your Yakima PowderHound carrier to crossbars that are up to 3-7/8" wide or 1-1/4" tall. The longer bolts for…

view full answer...

Answer 2

Yes, the Replacement Mounting Hardware for Yakima Roof Mounted Ski and Snowboard Carriers #8830021 will fit your new Thule square crossbars and your old Yakima Ski Carrier.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 6

I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR for your 2023 Toyota Tacoma with the factory tow package. You will be able to connect the wiring using the Redarc Adapter #RED99FR directly to the factory connector. We also have the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 10

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...

Answer 11

Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the video…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...