What are the Dimensions of the Global Link and Bauer Cam Door Latches?

Question

Question:

What are the dimensions of the locking Bauer cam lock. Vs the global link trailer swivel bar locking cam lock ? I need the one with the lowest profile

asked by: Matt C

0

Expert Reply:

Thanks for your patience! I just heard back from Global Link and Bauer and have listed the dimensions of these two locks below:

The Global Link Vise Lock for Cam-Action Door Latch item # 295-000025 measures 3-1/2" wide x 6" tall x 1-1/4" deep.

The Bauer Products Locking Cam Latch for Horse Trailers item # BA32FR measures 3" wide x 6.6" tall x 1.26" deep.

expert reply by: Jerred H

0

Answer 1

The mounting holes for the Bauer Products Locking Cam Latch #BA32FR are spread 2-13/16" horizontally for the top 2 holes and 3-3/4" from the center line of the top holes to the center of the bottom hole(see image). The mounting holes for…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Eric! Are you wanting to change from disc brakes to electric hub and drums, or are you just wanting to replace the rotors themselves? Traditionally 10" brakes are only compatible with up to 15" wheels but if yours have been working just…

view full answer...

Answer 4

The inner diameter of Solera roller tubes like the Replacement 20' Roller Tube for Solera RV Awnings #LC33FR is 3", that being said Solera and other branded awnings are not compatible with each other. We typically have a lot of people…

view full answer...

Answer 5

If a thief has the time and opportunity they usually get what they want. If a thief was dedicated enough to breaking into your trailer that he would go the lengths you described to defeat the #BLDL-80 he would probably also find other ways (much…

view full answer...

Answer 6

The 15 inch version of the aluminum Bobcat trailer wheel with a 5 on 4-1/2" bolt pattern was discontinued by the manufacturer, so that particular wheel is not available. While I know it's not what you or your customer was looking to hear, we…

view full answer...

Answer 7

Since you have a 63 inch long Solera awning arm assembly in black the correct replacement is the part #LC404523.

view full answer...

Answer 8

You can't get a larger ball for the Rack'Em Trailer Dolly part #RA20, but the good news is that you don't need one to use it with a trailer trailer that has a coupler designed for a 2-5/16 inch hitch ball. The reason for this is that the…

view full answer...

Answer 9

There is nothing internally on the Redline Locking "L" Style Door Handle #276 that keeps it from rotating freely. This will turn more than 90 degrees as long as your existing locking system allows this. This handle features a 2-1/2 inch…

view full answer...

Answer 10

For a travel trailer weighing 4,500 pounds, I recommend going with the Trailer Valet XL Trailer Dolly #TVXL2. The Trailer Valet XL is going to offer much better support for the tongue weight of your trailer than a standard trailer dolly. The Trailer…

view full answer...

What are the Dimensions of the Global Link and Bauer Cam Door Latches?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching