To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.
Features:
Rhino-Rack Vortex Aero Crossbar - 59" - Black - Qty 1:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. It's Evangeline here at etrailer and today we'll be taking a look at our Rhino-Rack Gutter Mount Legs which are 8 1/4 inches tall here at etrailer. So these are going to be ideal If you have a Jeep, if you have a van, if you have a vehicle with either factory mounted gutters or if you install those gutters yourself but you also want a way to build or make a Rhino-Rack system. So these are your slightly taller than average gutter mount legs and that's gonna be ideal if you need a little extra height or clearance. Maybe you're carrying around skis with extra large bindings and you need that clearance underneath. Or maybe the way you have your gutters mounted is a little bit below the roof level compared to other vehicles.
Whatever situation you're in, let's see if this video will help you out with figuring if these are the right legs for you. So the towers themselves are made of nylon so that is a little bit more lightweight than let's say the steel towers you would see on your more traditional, let's say naked roof towers or the ones that clamp onto your roof. So this nylon again is lightweight but it's also UV resistant. So as you have this on your roof, as you have this on your gutter, it is gonna be exposed to the elements. It is going to be exposed to the sun and that's where their UV resistance comes in handy because you don't want it deteriorating underneath the sunlight.
With this being lightweight though, there is a glass reinforcement on the inside and that adds to its weight capacity as well as its durability. So the actual height measurement of this is going to be 8 1/4 inches tall. So that height is going to be from the channel of your gutter to right where your crossbar is attached. So it's not the total height but the usable height of your tower. So from there, you can then estimate from the underneath your crossbar, whether it be your Vortex crossbar or your square crossbar, that's gonna be the clearance you have from your roof to your crossbar.
So measure your own gutter mount or your own channel to see if this will work with your vehicle. Now, this is not using lock and key to secure it. What it does use is its own hex tool or hex key. It has its own special shape from Rhino-Rack and this is what is used to either tighten down or loosen the bolts holding the clamp into place. So if someone does not have this special hex tool, they won't be able to undo it.
So not the same as having your own key and your own lock keyed to or keyed to itself but it's still a form of security measure. Now the install process is really simple for these. All you need is a gutter to mount these towers to. You need the kit itself, you need your crossbars and you need some tools. So my final thoughts about these gutter mounts is that they give you a pretty decent height or clearance above your roof. So whether you have certain vehicles where you need access to the sunroof and you're worried about those really low profile bars that don't give you enough, if you have, let's say cargo or items that you are carrying that require a little bit more clearance like your skis with large bindings. Or if you have, let's say a solar panel on top of your roof and you just wanna get above that, this might be a great option for you. If you're just using a roof rack as a roof rack and you're not concerned about clearance but maybe a little bit more about looks, check out our recommended fit for your vehicle. Those are usually a little bit more low profile, look a little bit more factory like. They'll give you as much clearance but again, there's pros and cons, it does depend on you and your situation but I hope this video helped you out with that decision making. And that was a look here at our Rhino-Rack Gutter Mounted Legs which are 8 1/4 inches tall here at etrailer. My name is Evangeline and I hope this helps you out. Enjoy the journey..
Average Customer Rating: 4.6 out of 5 stars (38 Customer Reviews)
Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.I have this rack on my 1993 Toyota Hiace. Works perfectly as expected!
Worked well. Some time to install but worked well for my lightweight canoe.
Needed a third Vortex bar and Etrailer had the best price. One end of the box was not taped and had come open during shipping. The plastic end got a little scraped up, but not too bad. Luckily none of the parts fell out. I suggest taping both end of boxes before shipping.
Great design, perfect fit on my utility trailer. These are as low profile as it gets for a classic gutter mount enclosed trailer.
I didn't like the price, but its worth it....
My setup -
Thule - Super easy to setup. Thule Goalpost Hitch Mounted Load Bar (TH997)
Rhino-Rack Vortex Aero Crossbar (RRVA150B) and associated fit kit - Single set
Solid construction but the directions for the Rhino-Rack components are worthless. Look online to get general idea of installation.
I am very happy with the purchase of my Rhino Rack crossbar for my Toyota Tacoma. I added it because the Yakima Rack on my 5' bed did not hold my kayak in the position I wanted. I was pleasantly surprised by the lack of wind noise after reading numerous complaints of whistling at hwy speeds.
the crossbar itself is fine, I had ordered a single to accompany the two I already have on the vehicle so knew what I was getting.....or at least thought I did. Sadly the rubberized vortex strip was not included with the crossbar, appears everything else is there.
We had the challenge of how to carry 2 kayaks this summer in addition to hauling a 30 foot gooseneck horse trailer. We have F450 crew cab with custom truck bed. We hoped to use the "head ache" bar on the truck bed to support the rear sets of Swagman Rincon supports and purchased a single Rhino Vortex bar for the forward sets on top of the cab. We have 10.5 and 12 foot kayaks and this looks to be an excellent solution. The kayaks are clear of the gooseneck trailer even in a "jackknife" position. Please note the truck bed is extra long therefore there is plenty of room forward the nose of the trailer. We have not hauled yet but will convey any issues if there are any. eTrailer tech support was excellent. Product shipped as projected. Installation took approximatly 3 hours.
Rhino makes some of the best roof racks and accessories. Easy to install and they last.
Despite being higher priced than competitive products, the high quality and fit is always worth it for Rhino-Rack.
I think it just looks good first of all. I can carry my paddle boards and still use my one touch roof top.
Fits the system , has many accessories that can be added . Good quality
Easy to install. I’m giving it 4 stars because this bar was added above the front driver and passenger door and is noisy driving down the interstate. I’ve gotten use to it but can’t help think there should be a way to make it quieter. I don’t hear anything from the real bars but they are on the topper.
The racks are expensive, but are also worth it. I’ve used them mostly for my kayaks, but have also used them for carrying lumber and other home improvement items that won’t fit in my cab or bed.
I had a few issues with the ordering and shipping process, but they all got ironed out eventually.
A year later and they hold up great! I haul something every week on them and no complaints.
Great easy to install
Looks good and it works with my system, what else do you need!
Excellent with the Jeep 4xe SOT roof!
Excellent quality. Easy to install. No issues.
Matches the two rails ordered previously and allows me to have three cross bars on the spaced out across the roof of my F250 cab and camper cap. With the correct spacing it allows me to transport a 26ft rowing shell centered on the truck minimizing the overhang at both ends of the truck.
Quick delivery. Good, easy to understand instructions in assembly. Haven’t yet put the bar to use but the solid construction and attachment to the side of the truck seems to be very good. Will was a great help as I needed only 1 bar for my needs. Thanks
Excellent product and service
Fits Great, Strong, Easy, Love it!!
Great product! Easy to install on Jeep Wrangler. Goes well with Rhino Rack heavy duty bars. Needed the eight inch clearance for the one touch power roof thats 5 inches high folded.
Seems well made and looks great
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.