Cushioned Equalizer Recommendation for 2013 XLR Triple Axle Toy Hauler
Question:
I have a 2013 xlr tripple axle toy hauler 18,000 gvwr 29-33-29 shackle spacing. Looking at upgrading to rubber equalizers to help with the side stress on my shackles. Getting ready to install the morryde crossmembers at all 4 shackles. after I get the bent I beams straight and reinforced. What is the best equalizer system that will fit my spacing and gvwr?
asked by: Mike L
Expert Reply:
The shackle spacing dimension isn't typically how equalizer replacements are picked out but I can still help point you in the right direction. Most likely what you'll want is the MORryde Alltrek 4000 kit part # MR59ZR which does say it's for 33 inch wheelbases. The MORryde cushioned equalizers have the best reputation for improving ride quality which is why we recommend them.
These equalizers have a distance of 6-1/2 inches between the mounting holes that are on the left and right side. This is the most important dimension to match of all when determining a fit. The other option is the # MR39ZR which has a distance of 8 inches between the mounting holes.
These kits work with the MORryde X-Factor you mentioned installing soon as well.
Products Referenced in This Question
MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Triple Axle
- MORryde
more information >
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Triple Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Which MORryde X Factor Braces Do I Need for a Tandem Axle Trailer w/ CRE3000 Equalizers?
- Q&A: Determining The Correct MORryde CRE3000 Equalizers For Triple Axle Trailer W/ 33" Axle Spacing
- Q&A: Can MORryde X-Factor Crossmember Install in Unused Hole on Front Hanger
- Q&A: MORryde CRE3000 Equalizers, X-Factor Cross Members & SumoSprings For 2020 Keystone Outback 291UBH
- Q&A: Replacing Lippert Equa-Flex Equalizers With MORryde CRE3000 Equalizers
- Q&A: How To Install MORryde X-Factor Crossmember With Leaf Spring Hangers Wider Than 3
- Article: How to Raise Your Travel Trailer Height
- Q&A: Recommended Stabilizers For A Toy Hauler Ramp Door Patio
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Install E-Track in 3 Easy Steps
- Article: Trailer Wiring Diagrams