Parts Needed to Flat Tow 2012 Honda CR-V

Question

Question:

Hi guys! Can you put together and estimate for me? I need all the parts to install flat tow my 2012 Honda CRV. I need the baseplate, tow bar, wiring, permanently installed breaking system, fuse switch. I have used the Roadmaster towbar in the past on another car and liked it but open to suggestions with durability, ease of use etc as priority. Thanks!

asked by: Jodi H

0

Expert Reply:

I would be happy to put together a list of parts to flat tow your vehicle. Roadmaster is a great brand and what I typically recommend so I would stick with it. A lot of knowledge and experience goes into their parts. They're also easy to use and incredibly reliable . For your 2012 Honda CR-V I recommend the following:

-Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521567-5

-Roadmaster Falcon All-Terrain Tow Bar # RM-522

-RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643

-Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267

-Roadmaster FuseMaster Fuse Bypass # RM76511 (If your owner's manual says to only pull the #19 ACC radio fuse)

or

-Roadmaster FuseMaster Fuse Bypass # RM76512 (If your owner's manual says to pull the #19 ACC radio fuse and the #20 ACC key lock fuse)

-Roadmaster InvisiBrake Supplemental Braking System # RM-8700 with Brake-Lite Relay Kit # RM-88400

More than likely you will also need a high-low adapter to keep your tow bar level. I have attached an article below which explains how to measure and choose the correct adapter. I also added a link to all of our available high low adapters, along with installation videos for your reference.

expert reply by: Robin H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 12

I recommend using the Roadmaster wiring for your 2024 Ford Maverick because I've found it to be the most reliable on the market. The correct kit depends on if your Maverick has LED lights or not: - LED Lights #RM38FR - Non-LED Lights #RM-15267…

view full answer...