Picking Out MORryde Pin Box for 2018 Genesis Fifth Wheel

Question

Question:

What model # do I need for my 2018 genesis trailer?

asked by: Joe

0

Expert Reply:

Without more info it's hard to say for sure what pin box style you have and which MORryde you'd need but we did have a customer with a 2019 Genesis Vortex 3219 who we determined had a Lippert 1716 pin box which the part # MR97VR would be the correct fit for. I would feel pretty confident that is what you'd need but I would need more info to verify this.

expert reply by: Jameson C

0

Answer 1

All the MORryde Cushioned 5th Wheel Pin Boxes #MR57VR, #MR37VR and #MR97VR will share the same dimensions and are nearly identical to the Lippert 1716 5th Wheel Pin Box #LC1324791. I have attached a technical drawing for the MORryde pin boxes similar…

view full answer...

Answer 2

There is not a Flex Air pin box that is designed to replace a Lippert 1716, but there is a model that is extremely similar, the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1716 #MR97VR. This is a cushioned pin box that has…

view full answer...

Answer 3

Thanks so much for the photos and measurements, and we do have an excellent upgrade option for your Demco Glide Ride and it looks like you had a Lippert 1716 pin box, so you will need an upgrade that is designed as a replacement for the 1716. The…

view full answer...

Answer 4

There is a cushioned pin box that is a great replacement for a Lippert 1716, with the correct cushioned pin box being the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1716 #MR97VR.

view full answer...

Answer 5

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 6

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 7

The hangers you currently have on your trailer are ones I have run into before. That being said, I spoke with MORryde and the #MR27ZR will still fit your trailer, but there is a modification that will need to be made. You’ll have to trim according to…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 10

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...

Answer 11

I reached out to MORryde and the MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K #MR27ZR you were looking at is designed for 35" axle spacing and would not work with your trailer with 36" axle spacing. My…

view full answer...

Answer 12

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Picking Out MORryde Pin Box for 2018 Genesis Fifth Wheel

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching