Does The Curt Trailer Hitch Receiver # C11412 Fit Volkswagen Golf GTI Models

Question

Question:

Is GTI included or excluded in the text below? 2017 Volkswagen Golf CHANGE VEHICLE excluding GTI and R models GTI models

asked by: David S

0

Expert Reply:

The Curt Trailer Hitch Receiver # C11412 fits both GTI and non-GTI models. Our fitguide results are separated by fitment with GTI models because some hitches will not be compatible, but this one just so happens to work with multiple models.

expert reply by: Kevin C

0

Answer 1

The Kuat Sherpa 2.0 Bike Rack for 2 Bikes #SH12G has hooks that would interfere with fenders since they have to sit right up against the forks. The Kuat Transfer V2 for 2 bikes #KU84FR and 1 bike #KU64FR would both have the same issues. You'd be…

view full answer...

Answer 2

Pretty much any bike rack that holds the bikes strictly by the wheels like the Kuat Sherpa #SH12G is not going to be a good choice for a bike with fenders. A better option for your bike is the Swagman Chinook #S64683 that holds the bike by wheels…

view full answer...

Answer 3

For your 2017 Volkswagen Golf GTI we have the Curt hitch part #C11412 which is a confirmed fit and would work well for you. I attached an install video for more info as well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Does The Curt Trailer Hitch Receiver # C11412 Fit Volkswagen Golf GTI Models

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching