Bumper and Pintle Hitch Connection For a 2003 Chevrolet 6500 Series Chassis

Question

Question:

I need a bumper and pintle hitch with the spring on it for a Chevy 6500 2023 what’s combo do you recommend

asked by: Patrick P

0

Expert Reply:

Currently we do not have a custom fit setup for your 2023 Chevrolet 6500 but you may be able to create a custom setup. You can use the Fabrication Kit # 3371809042 along with the ICC Bumper # 3371809025 to create your own plate. The fabrication kit includes a 5/8" thick mounting plate which is 34-1/2" wide by 15-1/2" tall.

Then you will need to drill a hole in the mounting plate for a spring type Pintle Hook # 337BP100A. Otherwise we have a standard bolt on Pintle # 33710040

expert reply by: Bud M

0

Answer 1

I do have an option for you but the Curt Trailer Hitch Receiver part #C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is the…

view full answer...

Answer 2

The width of the tab you marked in your picture is 2.9" and the height is 6.32". I have attached the full dimensional drawing of the #3371809065 below for your reference.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The overall dimensions for the Buyers Products Pintle Hitch Plate w/ ICC Bumper for Chevy/GM 3500 Cab and Chassis #3371809035A are 63" wide x 15.5" tall x 3" deep. If you need any other measurements just let me know.

view full answer...

Answer 5

Yes we do, for your AL-KO 10k axles the correct caliper for the left hand side of your trailer would be the #BP18-050. For the right hand side the part number is #BP18-060. For replacement pads you would want the Disc Brake Pads part #BP04-400.

view full answer...

Answer 6

Sounds like you are looking for the adapter part #K22590A. This adapter port features a 90-degree bend and measures 1/8" NPT on one end and 3/16" FIF on the other end.

view full answer...

Answer 7

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

view full answer...

Answer 8

I have a solution for you that is a little higher capacity than the #AM10501 that you asked about. You could use the ST235/85-16 tires in a load range G such as #TTWPRG235R16 which is rated for 4,400 pounds at 110 psi. Four of these would have an…

view full answer...

Answer 9

The best option we offer for installing standard trailer hitches on semi-tractors is with the Buyers Products Fabricators Hitch Plates which will be welded to the back of the frame with extra bracing and gussets. This will require professional…

view full answer...

Answer 10

The best trailer hitch option we would have for an International 4700 is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16. This hitch would indeed need to be either bolts or welded to the frame. The long brackets would…

view full answer...

Answer 11

The Buyers Products Fabricators Hitch Plates like part #3371809042 are not given a weight capacity by the manufacturer. This is because the weight capacity will largely be dependent on how securely it is mounted. The highest rated pintle hook we…

view full answer...

Answer 12

The wiring color codes and wire gauge recommendations for the Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector, item #PK11700, are listed below. White - Ground Return - 8 gauge Black - Clearance, Side Marker, Identification - 12 gauge…

view full answer...