Can Just One or Two Panels on the BAKFlip FiberMax Be Folded Back

Question

Question:

I know that you can drive with this cover fully closed, with 3 panels open and it clipped to the end, or with all four panels open and the cover leaning up and secured against the cab of the truck - is there a way to secure this cover with just one or two panels flipped open and be able to drive in that position?

asked by: BenP

0

Expert Reply:

No, the BAKFlip FiberMax Hard Tonneau Cover # BAK126204 only can be stored in one of three ways - 100% folded back to the rear window, 50% folded, or completely unfolded.

expert reply by: Bryce D

0

Answer 1

It's a bit of both - If you fold the BAKFlip G2 Hard Tonneau Cover #BAK26204 is folded half way you'll need to use the d-rings and a bungee cord to secure the cover to the truck bed. If you fold it all the way back, you can use the…

view full answer...

Answer 2

There isn't a retention strap currently offered to keep the first two panels of the BAKFlip G2 Hard Tonneau Cover #BAK26204 open while towing but you could easily make two with some straps and side-release buckles. I recommend picking up…

view full answer...

Answer 3

The BAKFlip MX4 #BAK48204 is of a slightly higher quality than the G2 #BAK26204 for your 2023 Ram 3500 long bed. The MX4 has a 5 year warranty versus the 3 year for the G2. The MX4 has matte finish panels that does a better job of hiding…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Corey; the BAKFlip MX4 Hard Tonneau Cover #BAK48204 weighs 71 lbs. There are several different Extang 2.0's so I'm not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 #EX94430 weighs 35 lbs and so does the Trifecta 2.0…

view full answer...

Answer 6

The BAKBox 2 Collapsible Truck Bed Toolbox #BAK92201 will be in a fixed position once installed. The bolts for the brackets are tightened down on each side to keep the toolbox in place. You can install it anywhere along the rails underneath the…

view full answer...

Answer 7

The HappiJac Truck-Mounted Camper Tie-Downs, part #LC236326-205221, are only available in the colors shown on that page. Even the replacement parts conform to the original color scheme.

view full answer...

Answer 8

Judging by the picture you submitted it looks like you were looking at a set of the Westin Tube Steps part #22-6035-1905. This would be a great choice for you if you are looking for this style of attachment. All of the other steps use a different…

view full answer...

Answer 9

The puck system hasn't changed between the 2022 and 2023 models, our fitguide just needs to be updated to reflect every fit so you could essentially choose any puck style hitch for a 2022 Ram 2500 and it will fit your 2023. You could use a hitch…

view full answer...

Answer 10

The pump should come on when you hit the brakes with your Dexter EOH system. I hope you have the Dexter #K71-651 for disc brakes versus the #K71-650 you asked from which will not work with disc brakes because it won't provide enough pressure. If…

view full answer...

Answer 11

Yes it does! The B&W Companion 5th Wheel Hitch #BWRVK3600 that fits your 2018 Ram 2500 with the factory puck system is completely compatible with a MORryde cushioned pin box. This is a fantastic set up, giving you a cushioned pin box along with…

view full answer...