Is There Custom Towed Vehicle Wiring Available For A 2011 Chevy Cruze LS

Question

Question:

Do you have a Custom Tail Light Wiring Kit for Towed Vehicles for a 2011 Chevy Cruze LS

asked by: Nicholas J

0

Expert Reply:

There unfortunately are no custom tail light wire harnesses available for a 2011 Chevy Cruze so you'll need to go with a splice-in diode kit like the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 instead. Since your Cruze has separate lighting this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter # 118158 and two additional diodes # RM-792 will be needed if you want to retain separate turn and brake signals.

expert reply by: Kevin C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…

view full answer...

Answer 5

What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.

view full answer...

Answer 6

Hey Robert, for your 2016 Jeep Wrangler using the Ready Brute Elite II tow bar you can use the Blue Ox Base Plate Kit #BX1126 with the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars #BX88297. From here, to complete your flat…

view full answer...

Answer 7

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

view full answer...

Answer 8

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 9

Yes, we do! It is the Hopkins Custom Tail Light Wiring Kit item #HM39VR. This will give you a plug and play set up to control your 2020 Jeep Wrangler's lights with your RV.

view full answer...

Answer 10

Hey Gary, the Hopkins tow bar lighting kit part #HM56200 that you referenced carries the stoplight circuit so the brake lights of the Jeep you have it installed in will still function regardless of if you have a braking system pressing the brake…

view full answer...

Answer 11

The best flat tow lighting kit we have for your 2015 GMC Sierra 1500 is the Roadmaster diode kit part #RM-15267. We don't have custom fit lighting kits for all of the vehicles we have at this time and your Sierra is one that we don't have. We…

view full answer...

Is There Custom Towed Vehicle Wiring Available For A 2011 Chevy Cruze LS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching